Updates for machine

convert/definitions/angle.js

@@ -1,49 +0,0 @@
-var angle;
-
-angle = {
-  rad: {
-    name: {
-      singular: 'radian'
-    , plural: 'radians'
-    }
-  , to_anchor: 180/Math.PI
-  }
-, deg: {
-    name: {
-      singular: 'degree'
-    , plural: 'degrees'
-    }
-  , to_anchor: 1
-  }
-, grad: {
-    name: {
-      singular: 'gradian'
-    , plural: 'gradians'
-    }
-  , to_anchor: 9/10
-  }
-, arcmin: {
-    name: {
-      singular: 'arcminute'
-    , plural: 'arcminutes'
-    }
-  , to_anchor: 1/60
-  }
-, arcsec: {
-    name: {
-      singular: 'arcsecond'
-    , plural: 'arcseconds'
-    }
-  , to_anchor: 1/3600
-  }
-};
-
-module.exports = {
-  metric: angle
-, _anchors: {
-    metric: {
-      unit: 'deg'
-    , ratio: 1
-    }
-  }
-};

convert/definitions/apparentPower.js

@@ -1,49 +0,0 @@
-var apparentPower;
-
-apparentPower = {
-  VA: {
-    name: {
-      singular: 'Volt-Ampere'
-    , plural: 'Volt-Amperes'
-    }
-  , to_anchor: 1
-  }
-, mVA: {
-    name: {
-      singular: 'Millivolt-Ampere'
-      , plural: 'Millivolt-Amperes'
-    }
-    , to_anchor: .001
-  }
-, kVA: {
-    name: {
-      singular: 'Kilovolt-Ampere'
-    , plural: 'Kilovolt-Amperes'
-    }
-  , to_anchor: 1000
-  }
-, MVA: {
-    name: {
-      singular: 'Megavolt-Ampere'
-    , plural: 'Megavolt-Amperes'
-    }
-  , to_anchor: 1000000
-  }
-, GVA: {
-    name: {
-      singular: 'Gigavolt-Ampere'
-    , plural: 'Gigavolt-Amperes'
-    }
-  , to_anchor: 1000000000
-  }
-};
-
-module.exports = {
-  metric: apparentPower
-, _anchors: {
-    metric: {
-      unit: 'VA'
-    , ratio: 1
-    }
-  }
-};

convert/definitions/area.js

@@ -1,93 +0,0 @@
-var metric
-  , imperial;
-
-metric = {
-  mm2: {
-    name: {
-      singular: 'Square Millimeter'
-    , plural: 'Square Millimeters'
-    }
-  , to_anchor: 1/1000000
-  }
-, cm2: {
-    name: {
-      singular: 'Centimeter'
-    , plural: 'Centimeters'
-    }
-  , to_anchor: 1/10000
-  }
-, m2: {
-    name: {
-      singular: 'Square Meter'
-    , plural: 'Square Meters'
-    }
-  , to_anchor: 1
-  }
-, ha: {
-    name: {
-      singular: 'Hectare'
-    , plural: 'Hectares'
-    }
-  , to_anchor: 10000
-  }
-, km2: {
-    name: {
-      singular: 'Square Kilometer'
-    , plural: 'Square Kilometers'
-    }
-  , to_anchor: 1000000
-  }
-};
-
-imperial = {
-  'in2': {
-    name: {
-      singular: 'Square Inch'
-    , plural: 'Square Inches'
-    }
-  , to_anchor: 1/144
-  }
-, yd2: {
-    name: {
-      singular: 'Square Yard'
-    , plural: 'Square Yards'  
-    }
-  , to_anchor: 9
-  }
-, ft2: {
-    name: {
-      singular: 'Square Foot'
-    , plural: 'Square Feet'
-    }
-  , to_anchor: 1
-  }
-, ac: {
-    name: {
-      singular: 'Acre'
-    , plural: 'Acres'
-    }
-  , to_anchor: 43560
-  }
-, mi2: {
-    name: {
-      singular: 'Square Mile'
-    , plural: 'Square Miles'
-    }
-  , to_anchor: 27878400
-  }
-};
-
-module.exports = {
-  metric: metric
-, imperial: imperial
-, _anchors: {
-    metric: {
-      unit: 'm2'
-    , ratio: 10.7639
-    }
-  , imperial: {
-      unit: 'ft2'
-    , ratio: 1/10.7639
-    }
-  }
-};

convert/definitions/current.js

@@ -1,35 +0,0 @@
-var current;
-
-current = {
-  A: {
-    name: {
-      singular: 'Ampere'
-    , plural: 'Amperes'
-    }
-  , to_anchor: 1
-  }
-, mA: {
-    name: {
-      singular: 'Milliampere'
-      , plural: 'Milliamperes'
-    }
-    , to_anchor: .001
-  }
-, kA: {
-    name: {
-      singular: 'Kiloampere'
-    , plural: 'Kiloamperes'
-    }
-  , to_anchor: 1000
-  }
-};
-
-module.exports = {
-  metric: current
-, _anchors: {
-    metric: {
-      unit: 'A'
-    , ratio: 1
-    }
-  }
-};

convert/definitions/digital.js

@@ -1,93 +0,0 @@
-var bits
-  , bytes;
-
-bits = {
-  b: {
-    name: {
-      singular: 'Bit'
-    , plural: 'Bits'
-    }
-  , to_anchor: 1
-  }
-, Kb: {
-    name: {
-      singular: 'Kilobit'
-    , plural: 'Kilobits'
-    }
-  , to_anchor: 1024
-  }
-, Mb: {
-    name: {
-      singular: 'Megabit'
-    , plural: 'Megabits'
-    }
-  , to_anchor: 1048576
-  }
-, Gb: {
-    name: {
-      singular: 'Gigabit'
-    , plural: 'Gigabits'
-    }
-  , to_anchor: 1073741824
-  }
-, Tb: {
-    name: {
-      singular: 'Terabit'
-    , plural: 'Terabits'
-    }
-  , to_anchor: 1099511627776
-  }
-};
-
-bytes = {
-  B: {
-    name: {
-      singular: 'Byte'
-    , plural: 'Bytes'
-    }
-  , to_anchor: 1
-  }
-, KB: {
-    name: {
-      singular: 'Kilobyte'
-    , plural: 'Kilobytes'
-    }
-  , to_anchor: 1024
-  }
-, MB: {
-    name: {
-      singular: 'Megabyte'
-    , plural: 'Megabytes'
-    }
-  , to_anchor: 1048576
-  }
-, GB: {
-    name: {
-      singular: 'Gigabyte'
-    , plural: 'Gigabytes'
-    }
-  , to_anchor: 1073741824
-  }
-, TB: {
-    name: {
-      singular: 'Terabyte'
-    , plural: 'Terabytes'
-    }
-  , to_anchor: 1099511627776
-  }
-};
-
-module.exports = {
-  bits: bits
-, bytes: bytes
-, _anchors: {
-    bits: {
-      unit: 'b'
-    , ratio: 1/8
-    }
-  , bytes: {
-      unit: 'B'
-    , ratio: 8
-    }
-  }
-};

convert/definitions/each.js

@@ -1,30 +0,0 @@
-var metric
-  , imperial;
-
-metric = {
-  ea: {
-    name: {
-      singular: 'Each'
-    , plural: 'Each'
-    }
-  , to_anchor: 1
-  },
-  dz: {
-    name: {
-      singular: 'Dozen'
-    , plural: 'Dozens'
-    }
-  , to_anchor: 12
-  }
-};
-
-module.exports = {
-  metric: metric
-, imperial: {}
-, _anchors: {
-    metric: {
-      unit: 'ea'
-    , ratio: 1
-    }
-  }
-};

convert/definitions/energy.js

@@ -1,63 +0,0 @@
-var energy;
-
-energy = {
-  Wh: {
-    name: {
-      singular: 'Watt-hour'
-    , plural: 'Watt-hours'
-    }
-  , to_anchor: 3600
-  }
-, mWh: {
-    name: {
-      singular: 'Milliwatt-hour'
-      , plural: 'Milliwatt-hours'
-    }
-    , to_anchor: 3.6
-  }
-, kWh: {
-    name: {
-      singular: 'Kilowatt-hour'
-    , plural: 'Kilowatt-hours'
-    }
-  , to_anchor: 3600000
-  }
-, MWh: {
-    name: {
-      singular: 'Megawatt-hour'
-    , plural: 'Megawatt-hours'
-    }
-  , to_anchor: 3600000000
-  }
-, GWh: {
-    name: {
-      singular: 'Gigawatt-hour'
-    , plural: 'Gigawatt-hours'
-    }
-  , to_anchor: 3600000000000
-  }
-, J: {
-    name: {
-      singular: 'Joule'
-    , plural: 'Joules'
-    }
-  , to_anchor: 1
-  }
-, kJ: {
-    name: {
-      singular: 'Kilojoule'
-    , plural: 'Kilojoules'
-    }
-  , to_anchor: 1000
-  }
-};
-
-module.exports = {
-  metric: energy
-, _anchors: {
-    metric: {
-      unit: 'J'
-    , ratio: 1
-    }
-  }
-};

convert/definitions/frequency.js

@@ -1,78 +0,0 @@
-var frequency;
-
-frequency = {
-  mHz: {
-    name: {
-      singular: 'millihertz'
-    , plural: 'millihertz'
-    }
-  , to_anchor: 1/1000
-  }
-, Hz: {
-    name: {
-      singular: 'hertz'
-    , plural: 'hertz'
-    }
-  , to_anchor: 1
-  }
-, kHz: {
-    name: {
-      singular: 'kilohertz'
-    , plural: 'kilohertz'
-    }
-  , to_anchor: 1000
-  }
-, MHz: {
-    name: {
-      singular: 'megahertz'
-    , plural: 'megahertz'
-    }
-  , to_anchor: 1000 * 1000
-  }
-, GHz: {
-    name: {
-      singular: 'gigahertz'
-    , plural: 'gigahertz'
-    }
-  , to_anchor: 1000 * 1000 * 1000
-  }
-, THz: {
-    name: {
-      singular: 'terahertz'
-    , plural: 'terahertz'
-    }
-  , to_anchor: 1000 * 1000 * 1000 * 1000
-  }
-, rpm: {
-    name: {
-      singular: 'rotation per minute'
-    , plural: 'rotations per minute'
-    }
-  , to_anchor: 1/60
-  }
-, "deg/s": {
-    name: {
-      singular: 'degree per second'
-    , plural: 'degrees per second'
-    }
-  , to_anchor: 1/360
-  }
-, "rad/s": {
-    name: {
-      singular: 'radian per second'
-    , plural: 'radians per second'
-    }
-  , to_anchor: 1/(Math.PI * 2)
-  }
-};
-
-
-module.exports = {
-  metric: frequency
-, _anchors: {
-    frequency: {
-      unit: 'hz'
-    , ratio: 1
-    }
-  }
-};

convert/definitions/illuminance.js

@@ -1,37 +0,0 @@
-var metric,
-imperial;
-
-metric = {
-  'lx': {
-    name: {
-      singular: 'Lux',
-      plural: 'Lux'
-    },
-    to_anchor: 1
-  }
-};
-
-imperial = {
-  'ft-cd': {
-    name: {
-      singular: 'Foot-candle',
-      plural: 'Foot-candles'
-    },
-    to_anchor: 1
-  }
-};
-
-module.exports = {
-  metric: metric,
-  imperial: imperial,
-  _anchors: {
-    metric: {
-      unit: 'lx',
-      ratio: 1/10.76391
-    },
-    imperial: {
-      unit: 'ft-cd',      
-	  ratio: 10.76391
-    }
-  }
-};

convert/definitions/length.js

@@ -1,86 +0,0 @@
-var metric,
-imperial;
-
-metric = {
-  mm: {
-    name: {
-      singular: 'Millimeter',
-      plural: 'Millimeters'
-    },
-    to_anchor: 1/1000
-  },
-  cm: {
-    name: {
-      singular: 'Centimeter',
-      plural: 'Centimeters'
-    },
-    to_anchor: 1/100
-  },
-  m: {
-    name: {
-      singular: 'Meter',
-      plural: 'Meters'
-    },
-    to_anchor: 1
-  },
-  km: {
-    name: {
-      singular: 'Kilometer',
-      plural: 'Kilometers'
-    },
-    to_anchor: 1000
-  }
-};
-
-imperial = {
-  'in': {
-    name: {
-      singular: 'Inch',
-      plural: 'Inches'
-    },
-    to_anchor: 1/12
-  },
-  yd: {
-    name: {
-      singular: 'Yard',
-      plural: 'Yards'
-    },
-    to_anchor: 3
-  },
-  'ft-us': {
-    name: {
-      singular: 'US Survey Foot',
-      plural: 'US Survey Feet'
-    },
-    to_anchor: 1.000002
-  },
-  ft: {
-    name: {
-      singular: 'Foot',
-      plural: 'Feet'
-    },
-    to_anchor: 1
-  },
-  mi: {
-    name: {
-      singular: 'Mile',
-      plural: 'Miles'
-    },
-    to_anchor: 5280
-  }
-};
-
-module.exports = {
-  metric: metric,
-  imperial: imperial,
-  _anchors: {
-    metric: {
-      unit: 'm',
-      ratio: 3.28084
-    },
-    imperial: {
-      unit: 'ft',
-      ratio: 1/3.28084
-    }
-  }
-};

convert/definitions/mass.js

@@ -1,78 +0,0 @@
-var metric
-  , imperial;
-
-metric = {
-  mcg: {
-    name: {
-      singular: 'Microgram'
-    , plural: 'Micrograms'
-    }
-  , to_anchor: 1/1000000
-  }
-, mg: {
-    name: {
-      singular: 'Milligram'
-    , plural: 'Milligrams'
-    }
-  , to_anchor: 1/1000
-  }
-, g: {
-    name: {
-      singular: 'Gram'
-    , plural: 'Grams'
-    }
-  , to_anchor: 1
-  }
-, kg: {
-    name: {
-      singular: 'Kilogram'
-    , plural: 'Kilograms'
-    }
-  , to_anchor: 1000
-}
-, mt: {
-    name: {
-      singular: 'Metric Tonne'
-    , plural: 'Metric Tonnes'
-    }
-  , to_anchor: 1000000
-  }
-};
-
-imperial = {
-  oz: {
-    name: {
-      singular: 'Ounce'
-    , plural: 'Ounces'
-    }
-  , to_anchor: 1/16
-  }
-, lb: {
-    name: {
-      singular: 'Pound'
-    , plural: 'Pounds'
-    }
-  , to_anchor: 1
-}, t: {
-  name: {
-    singular: 'Ton',
-    plural: 'Tons',
-  },
-    to_anchor: 2000,
-  },
-};
-
-module.exports = {
-  metric: metric
-, imperial: imperial
-, _anchors: {
-    metric: {
-      unit: 'g'
-    , ratio: 1/453.592
-    }
-  , imperial: {
-      unit: 'lb'
-    , ratio: 453.592
-    }
-  }
-};

convert/definitions/pace.js

@@ -1,51 +0,0 @@
-var metric
-  , imperial;
-
-metric = {
-  'min/km': {
-    name: {
-      singular: 'Minute per kilometre'
-    , plural: 'Minutes per kilometre'
-    }
-  , to_anchor: 0.06
-  }
-  ,'s/m': {
-    name: {
-      singular: 'Second per metre'
-    , plural: 'Seconds per metre'
-    }
-  , to_anchor: 1
-  }
-}
-
-imperial = {
-    'min/mi': {
-      name: {
-        singular: 'Minute per mile'
-      , plural: 'Minutes per mile'
-      }
-    , to_anchor: 0.0113636
-   }
-   , 's/ft': {
-      name: {
-        singular: 'Second per foot'
-      , plural: 'Seconds per foot'
-      }
-    , to_anchor: 1
-   }
-};
-
-module.exports = {
-  metric: metric
-, imperial: imperial
-, _anchors: {
-    metric: {
-      unit: 's/m'
-    , ratio: 0.3048
-    }
-  , imperial: {
-      unit: 's/ft'
-    , ratio: 1/0.3048
-    }
-  }
-};

convert/definitions/partsPer.js

@@ -1,44 +0,0 @@
-var metric
-  , imperial;
-
-metric = {
-  ppm: {
-    name: {
-      singular: 'Part-per Million'
-      , plural: 'Parts-per Million'
-    }
-    , to_anchor: 1
-  }
-  , ppb: {
-    name: {
-      singular: 'Part-per Billion'
-      , plural: 'Parts-per Billion'
-    }
-    , to_anchor: .001
-  }
-  , ppt: {
-    name: {
-      singular: 'Part-per Trillion'
-      , plural: 'Parts-per Trillion'
-    }
-    , to_anchor: .000001
-  }
-  , ppq: {
-    name: {
-      singular: 'Part-per Quadrillion'
-      , plural: 'Parts-per Quadrillion'
-    }
-    , to_anchor: .000000001
-  }
-};
-
-module.exports = {
-  metric: metric
-  , imperial: {}
-  , _anchors: {
-    metric: {
-      unit: 'ppm'
-      , ratio: .000001
-    }
-  }
-};

convert/definitions/power.js

@@ -1,49 +0,0 @@
-var power;
-
-power = {
-  W: {
-    name: {
-      singular: 'Watt'
-    , plural: 'Watts'
-    }
-  , to_anchor: 1
-  }
-, mW: {
-    name: {
-      singular: 'Milliwatt'
-      , plural: 'Milliwatts'
-    }
-    , to_anchor: .001
-  }
-, kW: {
-    name: {
-      singular: 'Kilowatt'
-    , plural: 'Kilowatts'
-    }
-  , to_anchor: 1000
-  }
-, MW: {
-    name: {
-      singular: 'Megawatt'
-    , plural: 'Megawatts'
-    }
-  , to_anchor: 1000000
-  }
-, GW: {
-    name: {
-      singular: 'Gigawatt'
-    , plural: 'Gigawatts'
-    }
-  , to_anchor: 1000000000
-  }
-};
-
-module.exports = {
-  metric: power
-, _anchors: {
-    metric: {
-      unit: 'W'
-    , ratio: 1
-    }
-  }
-};

convert/definitions/pressure.js

@@ -1,86 +0,0 @@
-var metric
-  , imperial;
-
-metric = {
-  Pa: {
-    name: {
-      singular: 'pascal'
-    , plural: 'pascals'
-    }
-  , to_anchor: 1/1000
-  }
-, kPa: {
-    name: {
-      singular: 'kilopascal'
-    , plural: 'kilopascals'
-    }
-  , to_anchor: 1
-  }
-, MPa: {
-    name: {
-      singular: 'megapascal'
-    , plural: 'megapascals'
-    }
-  , to_anchor: 1000
-  }
-, hPa: {
-    name: {
-      singular: 'hectopascal'
-    , plural: 'hectopascals'
-    }
-  , to_anchor: 1/10
-  }
-, bar: {
-    name: {
-      singular: 'bar'
-    , plural: 'bar'
-    }
-  , to_anchor: 100
-  }
-  , mbar: {
-    name: {
-      singular: 'mbar'
-    , plural: 'mbar'
-    }
-  , to_anchor: 1/10
-  }
-, torr: {
-    name: {
-      singular: 'torr'
-    , plural: 'torr'
-    }
-  , to_anchor: 101325/760000
-  }
-};
-
-imperial = {
-  psi: {
-    name: {
-      singular: 'pound per square inch'
-    , plural: 'pounds per square inch'
-    }
-  , to_anchor: 1/1000
-  }
-, ksi: {
-    name: {
-      singular: 'kilopound per square inch'
-    , plural: 'kilopound per square inch'
-    }
-  , to_anchor: 1
-  }
-};
-
-module.exports = {
-  metric: metric
-, imperial: imperial
-, _anchors: {
-    metric: {
-      unit: 'kPa'
-    , ratio: 0.00014503768078
-    }
-  , imperial: {
-      unit: 'psi'
-    , ratio: 1/0.00014503768078
-    }
-  }
-};

convert/definitions/reactiveEnergy.js

@@ -1,49 +0,0 @@
-var reactiveEnergy;
-
-reactiveEnergy = {
-  VARh: {
-    name: {
-      singular: 'Volt-Ampere Reactive Hour'
-    , plural: 'Volt-Amperes Reactive Hour'
-    }
-  , to_anchor: 1
-  }
-, mVARh: {
-    name: {
-      singular: 'Millivolt-Ampere Reactive Hour'
-      , plural: 'Millivolt-Amperes Reactive Hour'
-    }
-    , to_anchor: .001
-  }
-, kVARh: {
-    name: {
-      singular: 'Kilovolt-Ampere Reactive Hour'
-    , plural: 'Kilovolt-Amperes Reactive Hour'
-    }
-  , to_anchor: 1000
-  }
-, MVARh: {
-    name: {
-      singular: 'Megavolt-Ampere Reactive Hour'
-    , plural: 'Megavolt-Amperes Reactive Hour'
-    }
-  , to_anchor: 1000000
-  }
-, GVARh: {
-    name: {
-      singular: 'Gigavolt-Ampere Reactive Hour'
-    , plural: 'Gigavolt-Amperes Reactive Hour'
-    }
-  , to_anchor: 1000000000
-  }
-};
-
-module.exports = {
-  metric: reactiveEnergy
-, _anchors: {
-    metric: {
-      unit: 'VARh'
-    , ratio: 1
-    }
-  }
-};

convert/definitions/reactivePower.js

@@ -1,49 +0,0 @@
-var reactivePower;
-
-reactivePower = {
-  VAR: {
-    name: {
-      singular: 'Volt-Ampere Reactive'
-    , plural: 'Volt-Amperes Reactive'
-    }
-  , to_anchor: 1
-  }
-, mVAR: {
-    name: {
-      singular: 'Millivolt-Ampere Reactive'
-      , plural: 'Millivolt-Amperes Reactive'
-    }
-    , to_anchor: .001
-  }
-, kVAR: {
-    name: {
-      singular: 'Kilovolt-Ampere Reactive'
-    , plural: 'Kilovolt-Amperes Reactive'
-    }
-  , to_anchor: 1000
-  }
-, MVAR: {
-    name: {
-      singular: 'Megavolt-Ampere Reactive'
-    , plural: 'Megavolt-Amperes Reactive'
-    }
-  , to_anchor: 1000000
-  }
-, GVAR: {
-    name: {
-      singular: 'Gigavolt-Ampere Reactive'
-    , plural: 'Gigavolt-Amperes Reactive'
-    }
-  , to_anchor: 1000000000
-  }
-};
-
-module.exports = {
-  metric: reactivePower
-, _anchors: {
-    metric: {
-      unit: 'VAR'
-    , ratio: 1
-    }
-  }
-};

convert/definitions/speed.js

@@ -1,58 +0,0 @@
-var metric
-  , imperial;
-
-metric = {
-  'm/s': {
-    name: {
-      singular: 'Metre per second'
-    , plural: 'Metres per second'
-    }
-  , to_anchor: 3.6
-  }
-, 'km/h': {
-    name: {
-      singular: 'Kilometre per hour'
-    , plural: 'Kilometres per hour'
-    }
-  , to_anchor: 1
-  }
-}
-
-  imperial = {
-    'm/h': {
-      name: {
-        singular: 'Mile per hour'
-      , plural: 'Miles per hour'
-      }
-    , to_anchor: 1
-    }
-  , knot: {
-      name: {
-        singular: 'Knot'
-      , plural: 'Knots'
-      }
-    , to_anchor: 1.150779
-    }
-  , 'ft/s': {
-      name: {
-        singular: 'Foot per second'
-      , plural: 'Feet per second'
-      }
-    , to_anchor: 0.681818
-      }
-};
-
-module.exports = {
-  metric: metric
-, imperial: imperial
-, _anchors: {
-    metric: {
-      unit: 'km/h'
-    , ratio: 1/1.609344
-    }
-  , imperial: {
-      unit: 'm/h'
-    , ratio: 1.609344
-    }
-  }
-};

convert/definitions/temperature.js

@@ -1,55 +0,0 @@
-var metric
-  , imperial;
-
-metric = {
-  C: {
-    name: {
-      singular: 'degree Celsius'
-    , plural: 'degrees Celsius'
-    }
-  , to_anchor: 1
-  , anchor_shift: 0
-  },
-  K: {
-    name: {
-      singular: 'degree Kelvin'
-    , plural: 'degrees Kelvin'
-    }
-  , to_anchor: 1
-  , anchor_shift: 273.15
-  }
-};
-
-imperial = {
-  F: {
-    name: {
-      singular: 'degree Fahrenheit'
-    , plural: 'degrees Fahrenheit'
-    }
-  , to_anchor: 1
-  },
-  R: {
-    name: {
-      singular: 'degree Rankine'
-    , plural: 'degrees Rankine'
-    }
-  , to_anchor: 1
-  , anchor_shift: 459.67
-  }
-};
-
-module.exports = {
-  metric: metric
-, imperial: imperial
-, _anchors: {
-    metric: {
-      unit: 'C'
-    , transform: function (C) { return C / (5/9) + 32 }
-    }
-  , imperial: {
-      unit: 'F'
-    , transform: function (F) { return (F - 32) * (5/9) }
-    }
-  }
-};
-

convert/definitions/time.js

@@ -1,86 +0,0 @@
-var time;
-var daysInYear = 365.25;
-
-time = {
-  ns: {
-    name: {
-      singular: 'Nanosecond'
-    , plural: 'Nanoseconds'
-    }
-  , to_anchor: 1/1000000000
-  }
-, mu: {
-    name: {
-      singular: 'Microsecond'
-    , plural: 'Microseconds'
-    }
-  , to_anchor: 1/1000000
-  }
-, ms: {
-    name: {
-      singular: 'Millisecond'
-    , plural: 'Milliseconds'
-    }
-  , to_anchor: 1/1000
-  }
-, s: {
-    name: {
-      singular: 'Second'
-    , plural: 'Seconds'
-    }
-  , to_anchor: 1
-  }
-, min: {
-    name: {
-      singular: 'Minute'
-    , plural: 'Minutes'
-    }
-  , to_anchor: 60
-  }
-, h: {
-    name: {
-      singular: 'Hour'
-    , plural: 'Hours'
-    }
-  , to_anchor: 60 * 60 
-  }
-, d: {
-    name: {
-      singular: 'Day'
-    , plural: 'Days'
-    }
-  , to_anchor: 60 * 60 * 24
-  }
-, week: {
-    name: {
-      singular: 'Week'
-    , plural: 'Weeks'
-    }
-  , to_anchor: 60 * 60 * 24 * 7
-  }
-, month: {
-    name: {
-      singular: 'Month'
-    , plural: 'Months'
-    }
-  , to_anchor: 60 * 60 * 24 * daysInYear / 12
-  }
-, year: {
-    name: {
-      singular: 'Year'
-    , plural: 'Years'
-    }
-  , to_anchor: 60 * 60 * 24 * daysInYear
-  }
-};
-
-
-module.exports = {
-  metric: time 
-, _anchors: {
-    metric: {
-      unit: 's'
-    , ratio: 1
-    }
-  }
-};

convert/definitions/voltage.js

@@ -1,35 +0,0 @@
-var voltage;
-
-voltage = {
-  V: {
-    name: {
-      singular: 'Volt'
-    , plural: 'Volts'
-    }
-  , to_anchor: 1
-  }
-, mV: {
-    name: {
-      singular: 'Millivolt'
-      , plural: 'Millivolts'
-    }
-    , to_anchor: .001
-  }
-, kV: {
-    name: {
-      singular: 'Kilovolt'
-    , plural: 'Kilovolts'
-    }
-  , to_anchor: 1000
-  }
-};
-
-module.exports = {
-  metric: voltage
-, _anchors: {
-    metric: {
-      unit: 'V'
-    , ratio: 1
-    }
-  }
-};

convert/definitions/volume.js

@@ -1,200 +0,0 @@
-var metric
-  , imperial;
-
-metric = {
-  mm3: {
-      name: {
-        singular: 'Cubic Millimeter'
-      , plural: 'Cubic Millimeters'
-      }
-    , to_anchor: 1/1000000
-  }
-, cm3: {
-    name: {
-      singular: 'Cubic Centimeter'
-    , plural: 'Cubic Centimeters'
-    }
-  , to_anchor: 1/1000
-  }
-, ml: {
-    name: {
-      singular: 'Millilitre'
-    , plural: 'Millilitres'
-    }
-  , to_anchor: 1/1000
-  }
-, cl: {
-    name: {
-      singular: 'Centilitre'
-    , plural: 'Centilitres'
-    }
-  , to_anchor: 1/100
-  }
-, dl: {
-    name: {
-      singular: 'Decilitre'
-    , plural: 'Decilitres'
-    }
-  , to_anchor: 1/10
-  }
-, l: {
-    name: {
-      singular: 'Litre'
-    , plural: 'Litres'
-    }
-  , to_anchor: 1
-  }
-, kl: {
-    name: {
-      singular: 'Kilolitre'
-    , plural: 'Kilolitres'
-    }
-  , to_anchor: 1000
-  }
-, m3: {
-    name: {
-      singular: 'Cubic meter'
-    , plural: 'Cubic meters'
-    }
-  , to_anchor: 1000
-  }
-, km3: {
-    name: {
-      singular: 'Cubic kilometer'
-    , plural: 'Cubic kilometers'
-    }
-  , to_anchor: 1000000000000
-  }
-
-// Swedish units
-, krm: {
-  name: {
-    singular: 'Matsked'
-    , plural: 'Matskedar'
-  }
-  , to_anchor: 1/1000
-}
-, tsk: {
-    name: {
-      singular: 'Tesked'
-    , plural: 'Teskedar'
-    }
-  , to_anchor: 5/1000
-  }
-, msk: {
-    name: {
-      singular: 'Matsked'
-      , plural: 'Matskedar'
-    }
-    , to_anchor: 15/1000
-  }
-, kkp: {
-    name: {
-      singular: 'Kaffekopp'
-      , plural: 'Kaffekoppar'
-    }
-    , to_anchor: 150/1000
-  }
-, glas: {
-    name: {
-      singular: 'Glas'
-      , plural: 'Glas'
-    }
-    , to_anchor: 200/1000
-  }
-, kanna: {
-    name: {
-      singular: 'Kanna'
-    , plural: 'Kannor'
-    }
-  , to_anchor: 2.617
-  }
-};
-
-imperial = {
-  tsp: {
-    name: {
-      singular: 'Teaspoon'
-    , plural: 'Teaspoons'
-    }
-  , to_anchor: 1/6
-  }
-, Tbs: {
-    name: {
-      singular: 'Tablespoon'
-    , plural: 'Tablespoons'
-    }
-  , to_anchor: 1/2
-  }
-, in3: {
-    name: {
-      singular: 'Cubic inch'
-    , plural: 'Cubic inches'
-    }
-  , to_anchor: 0.55411
-  }
-, 'fl-oz': {
-    name: {
-      singular: 'Fluid Ounce'
-    , plural: 'Fluid Ounces'
-    }
-  , to_anchor: 1
-  }
-, cup: {
-    name: {
-      singular: 'Cup'
-    , plural: 'Cups'
-    }
-  , to_anchor: 8
-  }
-, pnt: {
-    name: {
-      singular: 'Pint'
-    , plural: 'Pints'
-    }
-  , to_anchor: 16
-  }
-, qt: {
-    name: {
-      singular: 'Quart'
-    , plural: 'Quarts'
-    }
-  , to_anchor: 32
-  }
-, gal: {
-    name: {
-      singular: 'Gallon'
-    , plural: 'Gallons'
-    }
-  , to_anchor: 128
-  }
-, ft3: {
-    name: {
-      singular: 'Cubic foot'
-    , plural: 'Cubic feet'
-    }
-  , to_anchor: 957.506
-  }
-, yd3: {
-    name: {
-      singular: 'Cubic yard'
-    , plural: 'Cubic yards'
-    }
-  , to_anchor: 25852.7
-  }
-};
-
-module.exports = {
-  metric: metric
-, imperial: imperial
-, _anchors: {
-    metric: {
-      unit: 'l'
-    , ratio: 33.8140226
-    }
-  , imperial: {
-      unit: 'fl-oz'
-    , ratio: 1/33.8140226
-    }
-  }
-};

convert/definitions/volumeFlowRate.js

@@ -1,282 +0,0 @@
-var metric
-  , imperial;
-
-metric = {
-  'mm3/s': {
-      name: {
-        singular: 'Cubic Millimeter per second'
-      , plural: 'Cubic Millimeters per second'
-      }
-    , to_anchor: 1/1000000
-  }
-, 'cm3/s': {
-    name: {
-      singular: 'Cubic Centimeter per second'
-    , plural: 'Cubic Centimeters per second'
-    }
-  , to_anchor: 1/1000
-  }
-, 'ml/s': {
-    name: {
-      singular: 'Millilitre per second'
-    , plural: 'Millilitres per second'
-    }
-  , to_anchor: 1/1000
-  }
-, 'cl/s': {
-    name: {
-      singular: 'Centilitre per second'
-    , plural: 'Centilitres per second'
-    }
-  , to_anchor: 1/100
-  }
-, 'dl/s': {
-    name: {
-      singular: 'Decilitre per second'
-    , plural: 'Decilitres per second'
-    }
-  , to_anchor: 1/10
-  }
-, 'l/s': {
-    name: {
-      singular: 'Litre per second'
-    , plural: 'Litres per second'
-    }
-  , to_anchor: 1
-  }
-, 'l/min': {
-    name: {
-      singular: 'Litre per minute'
-    , plural: 'Litres per minute'
-    }
-  , to_anchor: 1/60
-  }
-, 'l/h': {
-    name: {
-      singular: 'Litre per hour'
-    , plural: 'Litres per hour'
-    }
-  , to_anchor: 1/3600
-  }
-, 'kl/s': {
-    name: {
-      singular: 'Kilolitre per second'
-    , plural: 'Kilolitres per second'
-    }
-  , to_anchor: 1000
-  }
-, 'kl/min': {
-    name: {
-      singular: 'Kilolitre per minute'
-    , plural: 'Kilolitres per minute'
-    }
-  , to_anchor: 50/3
-  }
-, 'kl/h': {
-    name: {
-      singular: 'Kilolitre per hour'
-    , plural: 'Kilolitres per hour'
-    }
-  , to_anchor: 5/18
-  }
-, 'm3/s': {
-    name: {
-      singular: 'Cubic meter per second'
-    , plural: 'Cubic meters per second'
-    }
-  , to_anchor: 1000
-  }
-, 'm3/min': {
-    name: {
-      singular: 'Cubic meter per minute'
-    , plural: 'Cubic meters per minute'
-    }
-  , to_anchor: 50/3
-  }
-, 'm3/h': {
-    name: {
-      singular: 'Cubic meter per hour'
-    , plural: 'Cubic meters per hour'
-    }
-  , to_anchor: 5/18
-  }
-, 'km3/s': {
-    name: {
-      singular: 'Cubic kilometer per second'
-    , plural: 'Cubic kilometers per second'
-    }
-  , to_anchor: 1000000000000
-  }
-};
-
-imperial = {
-  'tsp/s': {
-    name: {
-      singular: 'Teaspoon per second'
-    , plural: 'Teaspoons per second'
-    }
-  , to_anchor: 1/6
-  }
-, 'Tbs/s': {
-    name: {
-      singular: 'Tablespoon per second'
-    , plural: 'Tablespoons per second'
-    }
-  , to_anchor: 1/2
-  }
-, 'in3/s': {
-    name: {
-      singular: 'Cubic inch per second'
-    , plural: 'Cubic inches per second'
-    }
-  , to_anchor: 0.55411
-  }
-, 'in3/min': {
-    name: {
-      singular: 'Cubic inch per minute'
-    , plural: 'Cubic inches per minute'
-    }
-  , to_anchor: 0.55411/60
-  }
-, 'in3/h': {
-    name: {
-      singular: 'Cubic inch per hour'
-    , plural: 'Cubic inches per hour'
-    }
-  , to_anchor: 0.55411/3600
-  }
-, 'fl-oz/s': {
-    name: {
-      singular: 'Fluid Ounce per second'
-    , plural: 'Fluid Ounces per second'
-    }
-  , to_anchor: 1
-  }
-, 'fl-oz/min': {
-    name: {
-      singular: 'Fluid Ounce per minute'
-    , plural: 'Fluid Ounces per minute'
-    }
-  , to_anchor: 1/60
-  }
-, 'fl-oz/h': {
-    name: {
-      singular: 'Fluid Ounce per hour'
-    , plural: 'Fluid Ounces per hour'
-    }
-  , to_anchor: 1/3600
-  }
-, 'cup/s': {
-    name: {
-      singular: 'Cup per second'
-    , plural: 'Cups per second'
-    }
-  , to_anchor: 8
-  }
-, 'pnt/s': {
-    name: {
-      singular: 'Pint per second'
-    , plural: 'Pints per second'
-    }
-  , to_anchor: 16
-  }
-, 'pnt/min': {
-    name: {
-      singular: 'Pint per minute'
-    , plural: 'Pints per minute'
-    }
-  , to_anchor: 4/15
-  }
-, 'pnt/h': {
-    name: {
-      singular: 'Pint per hour'
-    , plural: 'Pints per hour'
-    }
-  , to_anchor: 1/225
-  }
-, 'qt/s': {
-    name: {
-      singular: 'Quart per second'
-    , plural: 'Quarts per second'
-    }
-  , to_anchor: 32
-  }
-, 'gal/s': {
-    name: {
-      singular: 'Gallon per second'
-    , plural: 'Gallons per second'
-    }
-  , to_anchor: 128
-  }
-, 'gal/min': {
-    name: {
-      singular: 'Gallon per minute'
-    , plural: 'Gallons per minute'
-    }
-  , to_anchor: 32/15
-  }
-, 'gal/h': {
-    name: {
-      singular: 'Gallon per hour'
-    , plural: 'Gallons per hour'
-    }
-  , to_anchor: 8/225
-  }
-, 'ft3/s': {
-    name: {
-      singular: 'Cubic foot per second'
-    , plural: 'Cubic feet per second'
-    }
-  , to_anchor: 957.506
-  }
-, 'ft3/min': {
-    name: {
-      singular: 'Cubic foot per minute'
-    , plural: 'Cubic feet per minute'
-    }
-  , to_anchor: 957.506/60
-  }
-, 'ft3/h': {
-    name: {
-      singular: 'Cubic foot per hour'
-    , plural: 'Cubic feet per hour'
-    }
-  , to_anchor: 957.506/3600
-  }
-, 'yd3/s': {
-    name: {
-      singular: 'Cubic yard per second'
-    , plural: 'Cubic yards per second'
-    }
-  , to_anchor: 25852.7
-  }
-, 'yd3/min': {
-    name: {
-      singular: 'Cubic yard per minute'
-    , plural: 'Cubic yards per minute'
-    }
-  , to_anchor: 25852.7/60
-  }
-, 'yd3/h': {
-    name: {
-      singular: 'Cubic yard per hour'
-    , plural: 'Cubic yards per hour'
-    }
-  , to_anchor: 25852.7/3600
-  }
-};
-
-module.exports = {
-  metric: metric
-, imperial: imperial
-, _anchors: {
-    metric: {
-      unit: 'l/s'
-    , ratio: 33.8140227
-    }
-  , imperial: {
-      unit: 'fl-oz/s'
-    , ratio: 1/33.8140227
-    }
-  }
-};

convert/fysics.js

@@ -1,160 +0,0 @@
-/*
-Copyright: 
-Year : (c) 2023 
-Author : Rene De Ren
-Contact details : zn375ix3@gmail.com 
-Location : The Netherlands
-
-Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files 
-(the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, 
-merge, publish, distribute, sublicense, and/or sell copies of the Software, 
-and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
-The author shall be notified of any and all improvements or adaptations this software.
-
-THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, 
-INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. 
-IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, 
-DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 
-OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-*/
-
-class Fysics{
-    
-    constructor(){ 
-
-        //gasses
-        this.air_density = 0; // weight of air
-        this.atm_pressure = 1.01325 ; //atm pressure at sea level
-        this.earth_gravity = 9.80665 ; // acceleration of standard gravity on earth in m/s2
-        this.water_molar_mass = 18.01528 // g/mol
-        this.num_moles_water = 6.022 * 1023; // number of moles in water
-        this.water_density =  997 ; // this.water_molar_mass * this.num_moles_water // water density in kg/m3; 
-        
-        //load converter
-        this.convert = require('./index');
-
-        // o2 solubility curve based on pressure and temp
-        this.o2Solubility = {
-            1:  // abs bar
-            { 
-                x:[0,5,10,15,20,25,30,35,40,45,50], // temp in degrees celcius
-                y:[14.6,12.8,11.3,10.1,9.1,8.3,7.6,7,6.5,6,5.6], // mg/l
-            },
-            2:  // abs bar
-            { 
-                x:[0,5,10,15,20,25,30,35,40,45,50], // temp in degrees celcius
-                y:[29.2,25.5,22.6,20.2,18.2,16.5,15.2,14,12.9,12,11.3], // mg/l
-            },
-            4:  // abs bar
-            { 
-                x:[0,5,10,15,20,25,30,35,40,45,50], // temp in degrees celcius
-                y:[58.4,51.1,45.1,40.3,36.4,33.1,30.3,27.9,25.9,24,22.7], // mg/l
-            },
-        }
-
-    }
-
-    /*-------------------               functions               -------------------*/ 
-    //use input to calculate air density in kg/m3 is valid up to 100 degrees
-    //pressure in bar RH in % and temp in degrees celcius
-    // Antoine Equation is,  Log P = A - B / ( T + C )
-    // D8 = temp , d7 = RH , pressure in mbar = d6
-    //=1.2923*(273.15/(273.15+temp))*(((pressure*100000)-0.3783*((((MACHT(10,(8.07-(1730.63/(233.43+temp)))))*1000/760)*RH)*100))/(1.01325*100000))
-    /*
-    calc_air_dens(pressure,RH,temp){
-
-        let air_density = 
-        1.2923 * 
-        ( 
-            273.15 / ( 273.15 + temp ) 
-        )
-        *
-        (
-            (
-                (
-                    pressure * 100000
-                ) 
-                - 0.3783 * 
-                ( 
-                    ( 
-                        ( 
-                            ( 
-                                Math.pow( 10, ( 8.07 - ( 1730.63 / ( 233.43 + temp) ) ) ) 
-                            )
-                            *1000/760
-                        )
-                        *RH
-                    )
-                    *100
-                ) 
-            ) 
-            / (this.atm_pressure * 100000 )
-        );
-
-        return air_density ;
-    }
-    */
-
-    calc_air_dens(pressure, RH, temp) {
-        const Rd = 287.05; // Specific gas constant for dry air in J/(kg·K)
-        const Rv = 461.495; // Specific gas constant for water vapor in J/(kg·K)
-        
-        // Convert temperature to Kelvin
-        const T = temp + 273.15;
-        
-        // Antoine constants for water vapor
-        const A = 8.07131;
-        const B = 1730.63;
-        const C = 233.426;
-        
-        // Calculate saturation vapor pressure (e_s) using the Antoine equation (in hPa)
-        const e_s = Math.pow(10, (A - (B / (C + temp))));
-        
-        // Actual vapor pressure (e) in hPa
-        const e = RH * e_s / 100;
-        
-        // Convert pressure to Pascals
-        const pressurePa = this.convert(pressure).from('mbar').to('Pa');
-        
-        // Partial pressure of dry air (Pa)
-        const p_d = pressurePa - (e * 100);
-        
-        // Air density (kg/m³)
-        const air_density = (p_d / (Rd * T)) + ((e * 100) / (Rv * T));
-        
-        return air_density;
-    }
-
-    //convert height to pressure ( density => kg/m3 , height => meter) output is in bar
-    heigth_to_pressure(density,height){
-
-        //calc pressure
-        let pressure = density * this.earth_gravity * height;
-        //convert Pa to bar
-        pressure = this.convert(pressure).from('Pa').to('mbar');
-
-        return pressure;
-    }
-
-    //input is in meters ! 
-    calc_volume(height,width,length){
-        let result = 0;
-        result = height * width * length;
-        return result ;
-    }
-
-
-}
-
-/*
-let fysics = new Fysics();
-console.log("converted pressure : " + fysics.heigth_to_pressure(fysics.water_density,10) + " mbar ");
-console.log( "air density : " +  fysics.calc_air_dens(1.012,0,0) + " kg / m3" );
-
-//*/
-
-module.exports = Fysics;

convert/index.js

@@ -1,304 +0,0 @@
-var convert
-  , keys = require('./lodash/lodash.keys')
-  , each = require('./lodash/lodash.foreach')
-  , measures = {
-      length: require('./definitions/length')
-    , area: require('./definitions/area')
-    , mass: require('./definitions/mass')
-    , volume: require('./definitions/volume')
-    , each: require('./definitions/each')
-    , temperature: require('./definitions/temperature')
-    , time: require('./definitions/time')
-    , digital: require('./definitions/digital')
-    , partsPer: require('./definitions/partsPer')
-    , speed: require('./definitions/speed')
-    , pace: require('./definitions/pace')
-    , pressure: require('./definitions/pressure')
-    , current: require('./definitions/current')
-    , voltage: require('./definitions/voltage')
-    , power: require('./definitions/power')
-    , reactivePower: require('./definitions/reactivePower')
-    , apparentPower: require('./definitions/apparentPower')
-    , energy: require('./definitions/energy')
-    , reactiveEnergy: require('./definitions/reactiveEnergy')
-    , volumeFlowRate: require('./definitions/volumeFlowRate')
-    , illuminance: require('./definitions/illuminance')
-    , frequency: require('./definitions/frequency')
-    , angle : require('./definitions/angle')
-    }
-  , Converter;
-
-Converter = function (numerator, denominator) {
-  if(denominator)
-    this.val = numerator / denominator;
-  else
-    this.val = numerator;
-};
-
-/**
-* Lets the converter know the source unit abbreviation
-*/
-Converter.prototype.from = function (from) {
-  if(this.destination)
-    throw new Error('.from must be called before .to');
-
-  this.origin = this.getUnit(from);
-
-  if(!this.origin) {
-    this.throwUnsupportedUnitError(from);
-  }
-
-  return this;
-};
-
-/**
-* Converts the unit and returns the value
-*/
-Converter.prototype.to = function (to) {
-  if(!this.origin)
-    throw new Error('.to must be called after .from');
-
-  this.destination = this.getUnit(to);
-
-  var result
-    , transform;
-
-  if(!this.destination) {
-    this.throwUnsupportedUnitError(to);
-  }
-
-  // Don't change the value if origin and destination are the same
-  if (this.origin.abbr === this.destination.abbr) {
-    return this.val;
-  }
-
-  // You can't go from liquid to mass, for example
-  if(this.destination.measure != this.origin.measure) {
-    throw new Error('Cannot convert incompatible measures of '
-      + this.destination.measure + ' and ' + this.origin.measure);
-  }
-
-  /**
-  * Convert from the source value to its anchor inside the system
-  */
-  result = this.val * this.origin.unit.to_anchor;
-
-  /**
-  * For some changes it's a simple shift (C to K)
-  * So we'll add it when convering into the unit (later)
-  * and subtract it when converting from the unit
-  */
-  if (this.origin.unit.anchor_shift) {
-    result -= this.origin.unit.anchor_shift
-  }
-
-  /**
-  * Convert from one system to another through the anchor ratio. Some conversions
-  * aren't ratio based or require more than a simple shift. We can provide a custom
-  * transform here to provide the direct result
-  */
-  if(this.origin.system != this.destination.system) {
-    transform = measures[this.origin.measure]._anchors[this.origin.system].transform;
-    if (typeof transform === 'function') {
-      result = transform(result)
-    }
-    else {
-      result *= measures[this.origin.measure]._anchors[this.origin.system].ratio;
-    }
-  }
-
-  /**
-  * This shift has to be done after the system conversion business
-  */
-  if (this.destination.unit.anchor_shift) {
-    result += this.destination.unit.anchor_shift;
-  }
-
-  /**
-  * Convert to another unit inside the destination system
-  */
-  return result / this.destination.unit.to_anchor;
-};
-
-/**
-* Converts the unit to the best available unit.
-*/
-Converter.prototype.toBest = function(options) {
-  if(!this.origin)
-    throw new Error('.toBest must be called after .from');
-
-  var options = Object.assign({
-    exclude: [],
-    cutOffNumber: 1,
-  }, options)
-
-  var best;
-  /**
-    Looks through every possibility for the 'best' available unit.
-    i.e. Where the value has the fewest numbers before the decimal point,
-    but is still higher than 1.
-  */
-  each(this.possibilities(), function(possibility) {
-    var unit = this.describe(possibility);
-    var isIncluded = options.exclude.indexOf(possibility) === -1;
-
-    if (isIncluded && unit.system === this.origin.system) {
-      var result = this.to(possibility);
-      if (!best || (result >= options.cutOffNumber && result < best.val)) {
-        best = {
-          val: result,
-          unit: possibility,
-          singular: unit.singular,
-          plural: unit.plural
-        };
-      }
-    }
-  }.bind(this));
-
-  return best;
-}
-
-/**
-* Finds the unit
-*/
-Converter.prototype.getUnit = function (abbr) {
-  var found;
-
-  each(measures, function (systems, measure) {
-    each(systems, function (units, system) {
-      if(system == '_anchors')
-        return false;
-
-      each(units, function (unit, testAbbr) {
-        if(testAbbr == abbr) {
-          found = {
-            abbr: abbr
-          , measure: measure
-          , system: system
-          , unit: unit
-          };
-          return false;
-        }
-      });
-
-      if(found)
-        return false;
-    });
-
-    if(found)
-      return false;
-  });
-
-  return found;
-};
-
-var describe = function(resp) {
-  return {
-    abbr: resp.abbr
-  , measure: resp.measure
-  , system: resp.system
-  , singular: resp.unit.name.singular
-  , plural: resp.unit.name.plural
-  };
-}
-
-/**
-* An alias for getUnit
-*/
-Converter.prototype.describe = function (abbr) {
-  var resp = Converter.prototype.getUnit(abbr);
-  var desc = null;
-
-  try {
-    desc = describe(resp);
-  } catch(err) {
-    this.throwUnsupportedUnitError(abbr);
-  }
-
-  return desc;
-};
-
-/**
-* Detailed list of all supported units
-*/
-Converter.prototype.list = function (measure) {
-  var list = [];
-
-  each(measures, function (systems, testMeasure) {
-    if(measure && measure !== testMeasure)
-      return;
-
-    each(systems, function (units, system) {
-      if(system == '_anchors')
-        return false;
-
-      each(units, function (unit, abbr) {
-        list = list.concat(describe({
-          abbr: abbr,
-          measure: testMeasure
-        , system: system
-        , unit: unit
-        }));
-      });
-    });
-  });
-
-  return list;
-};
-
-Converter.prototype.throwUnsupportedUnitError = function (what) {
-  var validUnits = [];
-
-  each(measures, function (systems, measure) {
-    each(systems, function (units, system) {
-      if(system == '_anchors')
-        return false;
-
-      validUnits = validUnits.concat(keys(units));
-    });
-  });
-
-  throw new Error('Unsupported unit ' + what + ', use one of: ' + validUnits.join(', '));
-}
-
-/**
-* Returns the abbreviated measures that the value can be
-* converted to.
-*/
-Converter.prototype.possibilities = function (measure) {
-  var possibilities = [];
-  if(!this.origin && !measure) {
-	  each(keys(measures), function (measure){
-		  each(measures[measure], function (units, system) {
-		    if(system == '_anchors')
-		      return false;
-
-		    possibilities = possibilities.concat(keys(units));
-		  });
-	  });
-  } else {
-	  measure = measure || this.origin.measure;
-	  each(measures[measure], function (units, system) {
-	    if(system == '_anchors')
-	      return false;
-
-	    possibilities = possibilities.concat(keys(units));
-	  });
-  }
-
-  return possibilities;
-};
-
-/**
-* Returns the abbreviated measures that the value can be
-* converted to.
-*/
-Converter.prototype.measures = function () {
-  return keys(measures);
-};
-
-convert = function (value) {
-  return new Converter(value);
-};
-
-module.exports = convert;

convert/lodash/lodash._basebind/LICENSE.txt

@@ -1,22 +0,0 @@
-Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
-Based on Underscore.js 1.5.2, copyright 2009-2013 Jeremy Ashkenas,
-DocumentCloud and Investigative Reporters & Editors <http://underscorejs.org/>
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

convert/lodash/lodash._basebind/README.md

@@ -1,15 +0,0 @@
-# lodash._basebind v2.3.0
-
-The internal [Lo-Dash](http://lodash.com/) function `baseBind` as a [Node.js](http://nodejs.org/) module generated by [lodash-cli](https://npmjs.org/package/lodash-cli).
-
-## Author
-
-| [![twitter/jdalton](http://gravatar.com/avatar/299a3d891ff1920b69c364d061007043?s=70)](https://twitter.com/jdalton "Follow @jdalton on Twitter") |
-|---|
-| [John-David Dalton](http://allyoucanleet.com/) |
-
-## Contributors
-
-| [![twitter/blainebublitz](http://gravatar.com/avatar/ac1c67fd906c9fecd823ce302283b4c1?s=70)](https://twitter.com/blainebublitz "Follow @BlaineBublitz on Twitter") | [![twitter/kitcambridge](http://gravatar.com/avatar/6662a1d02f351b5ef2f8b4d815804661?s=70)](https://twitter.com/kitcambridge "Follow @kitcambridge on Twitter") | [![twitter/mathias](http://gravatar.com/avatar/24e08a9ea84deb17ae121074d0f17125?s=70)](https://twitter.com/mathias "Follow @mathias on Twitter") |
-|---|---|---|
-| [Blaine Bublitz](http://www.iceddev.com/) | [Kit Cambridge](http://kitcambridge.be/) | [Mathias Bynens](http://mathiasbynens.be/) |

convert/lodash/lodash._basebind/index.js

@@ -1,58 +0,0 @@
-/**
- * Lo-Dash 2.3.0 (Custom Build) <http://lodash.com/>
- * Build: `lodash modularize modern exports="npm" -o ./npm/`
- * Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
- * Based on Underscore.js 1.5.2 <http://underscorejs.org/LICENSE>
- * Copyright 2009-2013 Jeremy Ashkenas, DocumentCloud and Investigative Reporters & Editors
- * Available under MIT license <http://lodash.com/license>
- */
-var baseCreate = require('./../lodash._basecreate'),
-    isObject = require('./../lodash.isobject'),
-    setBindData = require('./../lodash._setbinddata');
-
-/**
- * Used for `Array` method references.
- *
- * Normally `Array.prototype` would suffice, however, using an array literal
- * avoids issues in Narwhal.
- */
-var arrayRef = [];
-
-/** Native method shortcuts */
-var push = arrayRef.push;
-
-/**
- * The base implementation of `_.bind` that creates the bound function and
- * sets its meta data.
- *
- * @private
- * @param {Array} bindData The bind data array.
- * @returns {Function} Returns the new bound function.
- */
-function baseBind(bindData) {
-  var func = bindData[0],
-      partialArgs = bindData[2],
-      thisArg = bindData[4];
-
-  function bound() {
-    // `Function#bind` spec
-    // http://es5.github.io/#x15.3.4.5
-    if (partialArgs) {
-      var args = partialArgs.slice();
-      push.apply(args, arguments);
-    }
-    // mimic the constructor's `return` behavior
-    // http://es5.github.io/#x13.2.2
-    if (this instanceof bound) {
-      // ensure `new bound` is an instance of `func`
-      var thisBinding = baseCreate(func.prototype),
-          result = func.apply(thisBinding, args || arguments);
-      return isObject(result) ? result : thisBinding;
-    }
-    return func.apply(thisArg, args || arguments);
-  }
-  setBindData(bound, bindData);
-  return bound;
-}
-
-module.exports = baseBind;

convert/lodash/lodash._basebind/package.json

@@ -1,21 +0,0 @@
-{
-  "name": "lodash._basebind",
-  "version": "2.3.0",
-  "description": "The internal Lo-Dash function `baseBind` as a Node.js module generated by lodash-cli.",
-  "homepage": "http://lodash.com/custom-builds",
-  "license": "MIT",
-  "author": "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-  "contributors": [
-    "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-    "Blaine Bublitz <blaine@iceddev.com> (http://www.iceddev.com/)",
-    "Kit Cambridge <github@kitcambridge.be> (http://kitcambridge.be/)",
-    "Mathias Bynens <mathias@qiwi.be> (http://mathiasbynens.be/)"
-  ],
-  "bugs": "https://github.com/lodash/lodash-cli/issues",
-  "repository": { "type": "git", "url": "https://github.com/lodash/lodash-cli.git" },
-  "dependencies": {
-    "lodash._basecreate": "~2.3.0",
-    "lodash.isobject": "~2.3.0",
-    "lodash._setbinddata": "~2.3.0"
-  }
-}

convert/lodash/lodash._basecreate/LICENSE.txt

@@ -1,22 +0,0 @@
-Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
-Based on Underscore.js 1.5.2, copyright 2009-2013 Jeremy Ashkenas,
-DocumentCloud and Investigative Reporters & Editors <http://underscorejs.org/>
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

convert/lodash/lodash._basecreate/README.md

@@ -1,15 +0,0 @@
-# lodash._basecreate v2.3.0
-
-The internal [Lo-Dash](http://lodash.com/) function `baseCreate` as a [Node.js](http://nodejs.org/) module generated by [lodash-cli](https://npmjs.org/package/lodash-cli).
-
-## Author
-
-| [![twitter/jdalton](http://gravatar.com/avatar/299a3d891ff1920b69c364d061007043?s=70)](https://twitter.com/jdalton "Follow @jdalton on Twitter") |
-|---|
-| [John-David Dalton](http://allyoucanleet.com/) |
-
-## Contributors
-
-| [![twitter/blainebublitz](http://gravatar.com/avatar/ac1c67fd906c9fecd823ce302283b4c1?s=70)](https://twitter.com/blainebublitz "Follow @BlaineBublitz on Twitter") | [![twitter/kitcambridge](http://gravatar.com/avatar/6662a1d02f351b5ef2f8b4d815804661?s=70)](https://twitter.com/kitcambridge "Follow @kitcambridge on Twitter") | [![twitter/mathias](http://gravatar.com/avatar/24e08a9ea84deb17ae121074d0f17125?s=70)](https://twitter.com/mathias "Follow @mathias on Twitter") |
-|---|---|---|
-| [Blaine Bublitz](http://www.iceddev.com/) | [Kit Cambridge](http://kitcambridge.be/) | [Mathias Bynens](http://mathiasbynens.be/) |

convert/lodash/lodash._basecreate/index.js

@@ -1,42 +0,0 @@
-/**
- * Lo-Dash 2.3.0 (Custom Build) <http://lodash.com/>
- * Build: `lodash modularize modern exports="npm" -o ./npm/`
- * Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
- * Based on Underscore.js 1.5.2 <http://underscorejs.org/LICENSE>
- * Copyright 2009-2013 Jeremy Ashkenas, DocumentCloud and Investigative Reporters & Editors
- * Available under MIT license <http://lodash.com/license>
- */
-var isObject = require('./../lodash.isobject'),
-    noop = require('./../lodash.noop'),
-    reNative = require('./../lodash._renative');
-
-/* Native method shortcuts for methods with the same name as other `lodash` methods */
-var nativeCreate = reNative.test(nativeCreate = Object.create) && nativeCreate;
-
-/**
- * The base implementation of `_.create` without support for assigning
- * properties to the created object.
- *
- * @private
- * @param {Object} prototype The object to inherit from.
- * @returns {Object} Returns the new object.
- */
-function baseCreate(prototype, properties) {
-  return isObject(prototype) ? nativeCreate(prototype) : {};
-}
-// fallback for browsers without `Object.create`
-if (!nativeCreate) {
-  baseCreate = (function() {
-    function Object() {}
-    return function(prototype) {
-      if (isObject(prototype)) {
-        Object.prototype = prototype;
-        var result = new Object;
-        Object.prototype = null;
-      }
-      return result || global.Object();
-    };
-  }());
-}
-
-module.exports = baseCreate;

convert/lodash/lodash._basecreate/package.json

@@ -1,21 +0,0 @@
-{
-  "name": "lodash._basecreate",
-  "version": "2.3.0",
-  "description": "The internal Lo-Dash function `baseCreate` as a Node.js module generated by lodash-cli.",
-  "homepage": "http://lodash.com/custom-builds",
-  "license": "MIT",
-  "author": "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-  "contributors": [
-    "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-    "Blaine Bublitz <blaine@iceddev.com> (http://www.iceddev.com/)",
-    "Kit Cambridge <github@kitcambridge.be> (http://kitcambridge.be/)",
-    "Mathias Bynens <mathias@qiwi.be> (http://mathiasbynens.be/)"
-  ],
-  "bugs": "https://github.com/lodash/lodash-cli/issues",
-  "repository": { "type": "git", "url": "https://github.com/lodash/lodash-cli.git" },
-  "dependencies": {
-    "lodash.isobject": "~2.3.0",
-    "lodash.noop": "~2.3.0",
-    "lodash._renative": "~2.3.0"
-  }
-}

convert/lodash/lodash._basecreatecallback/LICENSE.txt

@@ -1,22 +0,0 @@
-Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
-Based on Underscore.js 1.5.2, copyright 2009-2013 Jeremy Ashkenas,
-DocumentCloud and Investigative Reporters & Editors <http://underscorejs.org/>
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

convert/lodash/lodash._basecreatecallback/README.md

@@ -1,15 +0,0 @@
-# lodash._basecreatecallback v2.3.0
-
-The internal [Lo-Dash](http://lodash.com/) function `baseCreateCallback` as a [Node.js](http://nodejs.org/) module generated by [lodash-cli](https://npmjs.org/package/lodash-cli).
-
-## Author
-
-| [![twitter/jdalton](http://gravatar.com/avatar/299a3d891ff1920b69c364d061007043?s=70)](https://twitter.com/jdalton "Follow @jdalton on Twitter") |
-|---|
-| [John-David Dalton](http://allyoucanleet.com/) |
-
-## Contributors
-
-| [![twitter/blainebublitz](http://gravatar.com/avatar/ac1c67fd906c9fecd823ce302283b4c1?s=70)](https://twitter.com/blainebublitz "Follow @BlaineBublitz on Twitter") | [![twitter/kitcambridge](http://gravatar.com/avatar/6662a1d02f351b5ef2f8b4d815804661?s=70)](https://twitter.com/kitcambridge "Follow @kitcambridge on Twitter") | [![twitter/mathias](http://gravatar.com/avatar/24e08a9ea84deb17ae121074d0f17125?s=70)](https://twitter.com/mathias "Follow @mathias on Twitter") |
-|---|---|---|
-| [Blaine Bublitz](http://www.iceddev.com/) | [Kit Cambridge](http://kitcambridge.be/) | [Mathias Bynens](http://mathiasbynens.be/) |

convert/lodash/lodash._basecreatecallback/index.js

@@ -1,80 +0,0 @@
-/**
- * Lo-Dash 2.3.0 (Custom Build) <http://lodash.com/>
- * Build: `lodash modularize modern exports="npm" -o ./npm/`
- * Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
- * Based on Underscore.js 1.5.2 <http://underscorejs.org/LICENSE>
- * Copyright 2009-2013 Jeremy Ashkenas, DocumentCloud and Investigative Reporters & Editors
- * Available under MIT license <http://lodash.com/license>
- */
-var bind = require('./../lodash.bind'),
-    identity = require('./../lodash.identity'),
-    setBindData = require('./../lodash._setbinddata'),
-    support = require('./../lodash.support');
-
-/** Used to detected named functions */
-var reFuncName = /^\s*function[ \n\r\t]+\w/;
-
-/** Used to detect functions containing a `this` reference */
-var reThis = /\bthis\b/;
-
-/** Native method shortcuts */
-var fnToString = Function.prototype.toString;
-
-/**
- * The base implementation of `_.createCallback` without support for creating
- * "_.pluck" or "_.where" style callbacks.
- *
- * @private
- * @param {*} [func=identity] The value to convert to a callback.
- * @param {*} [thisArg] The `this` binding of the created callback.
- * @param {number} [argCount] The number of arguments the callback accepts.
- * @returns {Function} Returns a callback function.
- */
-function baseCreateCallback(func, thisArg, argCount) {
-  if (typeof func != 'function') {
-    return identity;
-  }
-  // exit early for no `thisArg` or already bound by `Function#bind`
-  if (typeof thisArg == 'undefined' || !('prototype' in func)) {
-    return func;
-  }
-  var bindData = func.__bindData__;
-  if (typeof bindData == 'undefined') {
-    if (support.funcNames) {
-      bindData = !func.name;
-    }
-    bindData = bindData || !support.funcDecomp;
-    if (!bindData) {
-      var source = fnToString.call(func);
-      if (!support.funcNames) {
-        bindData = !reFuncName.test(source);
-      }
-      if (!bindData) {
-        // checks if `func` references the `this` keyword and stores the result
-        bindData = reThis.test(source);
-        setBindData(func, bindData);
-      }
-    }
-  }
-  // exit early if there are no `this` references or `func` is bound
-  if (bindData === false || (bindData !== true && bindData[1] & 1)) {
-    return func;
-  }
-  switch (argCount) {
-    case 1: return function(value) {
-      return func.call(thisArg, value);
-    };
-    case 2: return function(a, b) {
-      return func.call(thisArg, a, b);
-    };
-    case 3: return function(value, index, collection) {
-      return func.call(thisArg, value, index, collection);
-    };
-    case 4: return function(accumulator, value, index, collection) {
-      return func.call(thisArg, accumulator, value, index, collection);
-    };
-  }
-  return bind(func, thisArg);
-}
-
-module.exports = baseCreateCallback;

convert/lodash/lodash._basecreatecallback/package.json

@@ -1,22 +0,0 @@
-{
-  "name": "lodash._basecreatecallback",
-  "version": "2.3.0",
-  "description": "The internal Lo-Dash function `baseCreateCallback` as a Node.js module generated by lodash-cli.",
-  "homepage": "http://lodash.com/custom-builds",
-  "license": "MIT",
-  "author": "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-  "contributors": [
-    "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-    "Blaine Bublitz <blaine@iceddev.com> (http://www.iceddev.com/)",
-    "Kit Cambridge <github@kitcambridge.be> (http://kitcambridge.be/)",
-    "Mathias Bynens <mathias@qiwi.be> (http://mathiasbynens.be/)"
-  ],
-  "bugs": "https://github.com/lodash/lodash-cli/issues",
-  "repository": { "type": "git", "url": "https://github.com/lodash/lodash-cli.git" },
-  "dependencies": {
-    "lodash.bind": "~2.3.0",
-    "lodash.identity": "~2.3.0",
-    "lodash._setbinddata": "~2.3.0",
-    "lodash.support": "~2.3.0"
-  }
-}

convert/lodash/lodash._basecreatewrapper/LICENSE.txt

@@ -1,22 +0,0 @@
-Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
-Based on Underscore.js 1.5.2, copyright 2009-2013 Jeremy Ashkenas,
-DocumentCloud and Investigative Reporters & Editors <http://underscorejs.org/>
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

convert/lodash/lodash._basecreatewrapper/README.md

@@ -1,15 +0,0 @@
-# lodash._basecreatewrapper v2.3.0
-
-The internal [Lo-Dash](http://lodash.com/) function `baseCreateWrapper` as a [Node.js](http://nodejs.org/) module generated by [lodash-cli](https://npmjs.org/package/lodash-cli).
-
-## Author
-
-| [![twitter/jdalton](http://gravatar.com/avatar/299a3d891ff1920b69c364d061007043?s=70)](https://twitter.com/jdalton "Follow @jdalton on Twitter") |
-|---|
-| [John-David Dalton](http://allyoucanleet.com/) |
-
-## Contributors
-
-| [![twitter/blainebublitz](http://gravatar.com/avatar/ac1c67fd906c9fecd823ce302283b4c1?s=70)](https://twitter.com/blainebublitz "Follow @BlaineBublitz on Twitter") | [![twitter/kitcambridge](http://gravatar.com/avatar/6662a1d02f351b5ef2f8b4d815804661?s=70)](https://twitter.com/kitcambridge "Follow @kitcambridge on Twitter") | [![twitter/mathias](http://gravatar.com/avatar/24e08a9ea84deb17ae121074d0f17125?s=70)](https://twitter.com/mathias "Follow @mathias on Twitter") |
-|---|---|---|
-| [Blaine Bublitz](http://www.iceddev.com/) | [Kit Cambridge](http://kitcambridge.be/) | [Mathias Bynens](http://mathiasbynens.be/) |

convert/lodash/lodash._basecreatewrapper/index.js

@@ -1,78 +0,0 @@
-/**
- * Lo-Dash 2.3.0 (Custom Build) <http://lodash.com/>
- * Build: `lodash modularize modern exports="npm" -o ./npm/`
- * Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
- * Based on Underscore.js 1.5.2 <http://underscorejs.org/LICENSE>
- * Copyright 2009-2013 Jeremy Ashkenas, DocumentCloud and Investigative Reporters & Editors
- * Available under MIT license <http://lodash.com/license>
- */
-var baseCreate = require('./../lodash._basecreate'),
-    isObject = require('./../lodash.isobject'),
-    setBindData = require('./../lodash._setbinddata'),
-    slice = require('./../lodash._slice');
-
-/**
- * Used for `Array` method references.
- *
- * Normally `Array.prototype` would suffice, however, using an array literal
- * avoids issues in Narwhal.
- */
-var arrayRef = [];
-
-/** Native method shortcuts */
-var push = arrayRef.push;
-
-/**
- * The base implementation of `createWrapper` that creates the wrapper and
- * sets its meta data.
- *
- * @private
- * @param {Array} bindData The bind data array.
- * @returns {Function} Returns the new function.
- */
-function baseCreateWrapper(bindData) {
-  var func = bindData[0],
-      bitmask = bindData[1],
-      partialArgs = bindData[2],
-      partialRightArgs = bindData[3],
-      thisArg = bindData[4],
-      arity = bindData[5];
-
-  var isBind = bitmask & 1,
-      isBindKey = bitmask & 2,
-      isCurry = bitmask & 4,
-      isCurryBound = bitmask & 8,
-      key = func;
-
-  function bound() {
-    var thisBinding = isBind ? thisArg : this;
-    if (partialArgs) {
-      var args = partialArgs.slice();
-      push.apply(args, arguments);
-    }
-    if (partialRightArgs || isCurry) {
-      args || (args = slice(arguments));
-      if (partialRightArgs) {
-        push.apply(args, partialRightArgs);
-      }
-      if (isCurry && args.length < arity) {
-        bitmask |= 16 & ~32;
-        return baseCreateWrapper([func, (isCurryBound ? bitmask : bitmask & ~3), args, null, thisArg, arity]);
-      }
-    }
-    args || (args = arguments);
-    if (isBindKey) {
-      func = thisBinding[key];
-    }
-    if (this instanceof bound) {
-      thisBinding = baseCreate(func.prototype);
-      var result = func.apply(thisBinding, args);
-      return isObject(result) ? result : thisBinding;
-    }
-    return func.apply(thisBinding, args);
-  }
-  setBindData(bound, bindData);
-  return bound;
-}
-
-module.exports = baseCreateWrapper;

convert/lodash/lodash._basecreatewrapper/package.json

@@ -1,22 +0,0 @@
-{
-  "name": "lodash._basecreatewrapper",
-  "version": "2.3.0",
-  "description": "The internal Lo-Dash function `baseCreateWrapper` as a Node.js module generated by lodash-cli.",
-  "homepage": "http://lodash.com/custom-builds",
-  "license": "MIT",
-  "author": "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-  "contributors": [
-    "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-    "Blaine Bublitz <blaine@iceddev.com> (http://www.iceddev.com/)",
-    "Kit Cambridge <github@kitcambridge.be> (http://kitcambridge.be/)",
-    "Mathias Bynens <mathias@qiwi.be> (http://mathiasbynens.be/)"
-  ],
-  "bugs": "https://github.com/lodash/lodash-cli/issues",
-  "repository": { "type": "git", "url": "https://github.com/lodash/lodash-cli.git" },
-  "dependencies": {
-    "lodash._basecreate": "~2.3.0",
-    "lodash.isobject": "~2.3.0",
-    "lodash._setbinddata": "~2.3.0",
-    "lodash._slice": "~2.3.0"
-  }
-}

convert/lodash/lodash._createwrapper/LICENSE.txt

@@ -1,22 +0,0 @@
-Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
-Based on Underscore.js 1.5.2, copyright 2009-2013 Jeremy Ashkenas,
-DocumentCloud and Investigative Reporters & Editors <http://underscorejs.org/>
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

convert/lodash/lodash._createwrapper/README.md

@@ -1,15 +0,0 @@
-# lodash._createwrapper v2.3.0
-
-The internal [Lo-Dash](http://lodash.com/) function `createWrapper` as a [Node.js](http://nodejs.org/) module generated by [lodash-cli](https://npmjs.org/package/lodash-cli).
-
-## Author
-
-| [![twitter/jdalton](http://gravatar.com/avatar/299a3d891ff1920b69c364d061007043?s=70)](https://twitter.com/jdalton "Follow @jdalton on Twitter") |
-|---|
-| [John-David Dalton](http://allyoucanleet.com/) |
-
-## Contributors
-
-| [![twitter/blainebublitz](http://gravatar.com/avatar/ac1c67fd906c9fecd823ce302283b4c1?s=70)](https://twitter.com/blainebublitz "Follow @BlaineBublitz on Twitter") | [![twitter/kitcambridge](http://gravatar.com/avatar/6662a1d02f351b5ef2f8b4d815804661?s=70)](https://twitter.com/kitcambridge "Follow @kitcambridge on Twitter") | [![twitter/mathias](http://gravatar.com/avatar/24e08a9ea84deb17ae121074d0f17125?s=70)](https://twitter.com/mathias "Follow @mathias on Twitter") |
-|---|---|---|
-| [Blaine Bublitz](http://www.iceddev.com/) | [Kit Cambridge](http://kitcambridge.be/) | [Mathias Bynens](http://mathiasbynens.be/) |

convert/lodash/lodash._createwrapper/index.js

@@ -1,98 +0,0 @@
-/**
- * Lo-Dash 2.3.0 (Custom Build) <http://lodash.com/>
- * Build: `lodash modularize modern exports="npm" -o ./npm/`
- * Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
- * Based on Underscore.js 1.5.2 <http://underscorejs.org/LICENSE>
- * Copyright 2009-2013 Jeremy Ashkenas, DocumentCloud and Investigative Reporters & Editors
- * Available under MIT license <http://lodash.com/license>
- */
-var baseBind = require('./../lodash._basebind'),
-    baseCreateWrapper = require('./../lodash._basecreatewrapper'),
-    isFunction = require('./../lodash.isfunction');
-
-/**
- * Used for `Array` method references.
- *
- * Normally `Array.prototype` would suffice, however, using an array literal
- * avoids issues in Narwhal.
- */
-var arrayRef = [];
-
-/** Native method shortcuts */
-var push = arrayRef.push;
-
-/**
- * Creates a function that, when called, either curries or invokes `func`
- * with an optional `this` binding and partially applied arguments.
- *
- * @private
- * @param {Function|string} func The function or method name to reference.
- * @param {number} bitmask The bitmask of method flags to compose.
- *  The bitmask may be composed of the following flags:
- *  1 - `_.bind`
- *  2 - `_.bindKey`
- *  4 - `_.curry`
- *  8 - `_.curry` (bound)
- *  16 - `_.partial`
- *  32 - `_.partialRight`
- * @param {Array} [partialArgs] An array of arguments to prepend to those
- *  provided to the new function.
- * @param {Array} [partialRightArgs] An array of arguments to append to those
- *  provided to the new function.
- * @param {*} [thisArg] The `this` binding of `func`.
- * @param {number} [arity] The arity of `func`.
- * @returns {Function} Returns the new function.
- */
-function createWrapper(func, bitmask, partialArgs, partialRightArgs, thisArg, arity) {
-  var isBind = bitmask & 1,
-      isBindKey = bitmask & 2,
-      isCurry = bitmask & 4,
-      isCurryBound = bitmask & 8,
-      isPartial = bitmask & 16,
-      isPartialRight = bitmask & 32;
-
-  if (!isBindKey && !isFunction(func)) {
-    throw new TypeError;
-  }
-  if (isPartial && !partialArgs.length) {
-    bitmask &= ~16;
-    isPartial = partialArgs = false;
-  }
-  if (isPartialRight && !partialRightArgs.length) {
-    bitmask &= ~32;
-    isPartialRight = partialRightArgs = false;
-  }
-  var bindData = func && func.__bindData__;
-  if (bindData && bindData !== true) {
-    bindData = bindData.slice();
-
-    // set `thisBinding` is not previously bound
-    if (isBind && !(bindData[1] & 1)) {
-      bindData[4] = thisArg;
-    }
-    // set if previously bound but not currently (subsequent curried functions)
-    if (!isBind && bindData[1] & 1) {
-      bitmask |= 8;
-    }
-    // set curried arity if not yet set
-    if (isCurry && !(bindData[1] & 4)) {
-      bindData[5] = arity;
-    }
-    // append partial left arguments
-    if (isPartial) {
-      push.apply(bindData[2] || (bindData[2] = []), partialArgs);
-    }
-    // append partial right arguments
-    if (isPartialRight) {
-      push.apply(bindData[3] || (bindData[3] = []), partialRightArgs);
-    }
-    // merge flags
-    bindData[1] |= bitmask;
-    return createWrapper.apply(null, bindData);
-  }
-  // fast path for `_.bind`
-  var creater = (bitmask == 1 || bitmask === 17) ? baseBind : baseCreateWrapper;
-  return creater([func, bitmask, partialArgs, partialRightArgs, thisArg, arity]);
-}
-
-module.exports = createWrapper;

convert/lodash/lodash._createwrapper/package.json

@@ -1,21 +0,0 @@
-{
-  "name": "lodash._createwrapper",
-  "version": "2.3.0",
-  "description": "The internal Lo-Dash function `createWrapper` as a Node.js module generated by lodash-cli.",
-  "homepage": "http://lodash.com/custom-builds",
-  "license": "MIT",
-  "author": "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-  "contributors": [
-    "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-    "Blaine Bublitz <blaine@iceddev.com> (http://www.iceddev.com/)",
-    "Kit Cambridge <github@kitcambridge.be> (http://kitcambridge.be/)",
-    "Mathias Bynens <mathias@qiwi.be> (http://mathiasbynens.be/)"
-  ],
-  "bugs": "https://github.com/lodash/lodash-cli/issues",
-  "repository": { "type": "git", "url": "https://github.com/lodash/lodash-cli.git" },
-  "dependencies": {
-    "lodash._basebind": "~2.3.0",
-    "lodash._basecreatewrapper": "~2.3.0",
-    "lodash.isfunction": "~2.3.0"
-  }
-}

convert/lodash/lodash._objecttypes/LICENSE.txt

@@ -1,22 +0,0 @@
-Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
-Based on Underscore.js 1.5.2, copyright 2009-2013 Jeremy Ashkenas,
-DocumentCloud and Investigative Reporters & Editors <http://underscorejs.org/>
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

convert/lodash/lodash._objecttypes/README.md

@@ -1,15 +0,0 @@
-# lodash._objecttypes v2.3.0
-
-The internal [Lo-Dash](http://lodash.com/) variable `objectTypes` as a [Node.js](http://nodejs.org/) module generated by [lodash-cli](https://npmjs.org/package/lodash-cli).
-
-## Author
-
-| [![twitter/jdalton](http://gravatar.com/avatar/299a3d891ff1920b69c364d061007043?s=70)](https://twitter.com/jdalton "Follow @jdalton on Twitter") |
-|---|
-| [John-David Dalton](http://allyoucanleet.com/) |
-
-## Contributors
-
-| [![twitter/blainebublitz](http://gravatar.com/avatar/ac1c67fd906c9fecd823ce302283b4c1?s=70)](https://twitter.com/blainebublitz "Follow @BlaineBublitz on Twitter") | [![twitter/kitcambridge](http://gravatar.com/avatar/6662a1d02f351b5ef2f8b4d815804661?s=70)](https://twitter.com/kitcambridge "Follow @kitcambridge on Twitter") | [![twitter/mathias](http://gravatar.com/avatar/24e08a9ea84deb17ae121074d0f17125?s=70)](https://twitter.com/mathias "Follow @mathias on Twitter") |
-|---|---|---|
-| [Blaine Bublitz](http://www.iceddev.com/) | [Kit Cambridge](http://kitcambridge.be/) | [Mathias Bynens](http://mathiasbynens.be/) |

convert/lodash/lodash._objecttypes/index.js

@@ -1,20 +0,0 @@
-/**
- * Lo-Dash 2.3.0 (Custom Build) <http://lodash.com/>
- * Build: `lodash modularize modern exports="npm" -o ./npm/`
- * Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
- * Based on Underscore.js 1.5.2 <http://underscorejs.org/LICENSE>
- * Copyright 2009-2013 Jeremy Ashkenas, DocumentCloud and Investigative Reporters & Editors
- * Available under MIT license <http://lodash.com/license>
- */
-
-/** Used to determine if values are of the language type Object */
-var objectTypes = {
-  'boolean': false,
-  'function': true,
-  'object': true,
-  'number': false,
-  'string': false,
-  'undefined': false
-};
-
-module.exports = objectTypes;

convert/lodash/lodash._objecttypes/package.json

@@ -1,16 +0,0 @@
-{
-  "name": "lodash._objecttypes",
-  "version": "2.3.0",
-  "description": "The internal Lo-Dash variable `objectTypes` as a Node.js module generated by lodash-cli.",
-  "homepage": "http://lodash.com/custom-builds",
-  "license": "MIT",
-  "author": "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-  "contributors": [
-    "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-    "Blaine Bublitz <blaine@iceddev.com> (http://www.iceddev.com/)",
-    "Kit Cambridge <github@kitcambridge.be> (http://kitcambridge.be/)",
-    "Mathias Bynens <mathias@qiwi.be> (http://mathiasbynens.be/)"
-  ],
-  "bugs": "https://github.com/lodash/lodash-cli/issues",
-  "repository": { "type": "git", "url": "https://github.com/lodash/lodash-cli.git" }
-}

convert/lodash/lodash._renative/LICENSE.txt

@@ -1,22 +0,0 @@
-Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
-Based on Underscore.js 1.5.2, copyright 2009-2013 Jeremy Ashkenas,
-DocumentCloud and Investigative Reporters & Editors <http://underscorejs.org/>
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

convert/lodash/lodash._renative/README.md

@@ -1,15 +0,0 @@
-# lodash._renative v2.3.0
-
-The internal [Lo-Dash](http://lodash.com/) variable `reNative` as a [Node.js](http://nodejs.org/) module generated by [lodash-cli](https://npmjs.org/package/lodash-cli).
-
-## Author
-
-| [![twitter/jdalton](http://gravatar.com/avatar/299a3d891ff1920b69c364d061007043?s=70)](https://twitter.com/jdalton "Follow @jdalton on Twitter") |
-|---|
-| [John-David Dalton](http://allyoucanleet.com/) |
-
-## Contributors
-
-| [![twitter/blainebublitz](http://gravatar.com/avatar/ac1c67fd906c9fecd823ce302283b4c1?s=70)](https://twitter.com/blainebublitz "Follow @BlaineBublitz on Twitter") | [![twitter/kitcambridge](http://gravatar.com/avatar/6662a1d02f351b5ef2f8b4d815804661?s=70)](https://twitter.com/kitcambridge "Follow @kitcambridge on Twitter") | [![twitter/mathias](http://gravatar.com/avatar/24e08a9ea84deb17ae121074d0f17125?s=70)](https://twitter.com/mathias "Follow @mathias on Twitter") |
-|---|---|---|
-| [Blaine Bublitz](http://www.iceddev.com/) | [Kit Cambridge](http://kitcambridge.be/) | [Mathias Bynens](http://mathiasbynens.be/) |

convert/lodash/lodash._renative/index.js

@@ -1,23 +0,0 @@
-/**
- * Lo-Dash 2.3.0 (Custom Build) <http://lodash.com/>
- * Build: `lodash modularize modern exports="npm" -o ./npm/`
- * Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
- * Based on Underscore.js 1.5.2 <http://underscorejs.org/LICENSE>
- * Copyright 2009-2013 Jeremy Ashkenas, DocumentCloud and Investigative Reporters & Editors
- * Available under MIT license <http://lodash.com/license>
- */
-
-/** Used for native method references */
-var objectProto = Object.prototype;
-
-/** Used to resolve the internal [[Class]] of values */
-var toString = objectProto.toString;
-
-/** Used to detect if a method is native */
-var reNative = RegExp('^' +
-  String(toString)
-    .replace(/[.*+?^${}()|[\]\\]/g, '\\$&')
-    .replace(/toString| for [^\]]+/g, '.*?') + '$'
-);
-
-module.exports = reNative;

convert/lodash/lodash._renative/package.json

@@ -1,16 +0,0 @@
-{
-  "name": "lodash._renative",
-  "version": "2.3.0",
-  "description": "The internal Lo-Dash variable `reNative` as a Node.js module generated by lodash-cli.",
-  "homepage": "http://lodash.com/custom-builds",
-  "license": "MIT",
-  "author": "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-  "contributors": [
-    "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-    "Blaine Bublitz <blaine@iceddev.com> (http://www.iceddev.com/)",
-    "Kit Cambridge <github@kitcambridge.be> (http://kitcambridge.be/)",
-    "Mathias Bynens <mathias@qiwi.be> (http://mathiasbynens.be/)"
-  ],
-  "bugs": "https://github.com/lodash/lodash-cli/issues",
-  "repository": { "type": "git", "url": "https://github.com/lodash/lodash-cli.git" }
-}

convert/lodash/lodash._setbinddata/LICENSE.txt

@@ -1,22 +0,0 @@
-Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
-Based on Underscore.js 1.5.2, copyright 2009-2013 Jeremy Ashkenas,
-DocumentCloud and Investigative Reporters & Editors <http://underscorejs.org/>
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

convert/lodash/lodash._setbinddata/README.md

@@ -1,15 +0,0 @@
-# lodash._setbinddata v2.3.0
-
-The internal [Lo-Dash](http://lodash.com/) function `setBindData` as a [Node.js](http://nodejs.org/) module generated by [lodash-cli](https://npmjs.org/package/lodash-cli).
-
-## Author
-
-| [![twitter/jdalton](http://gravatar.com/avatar/299a3d891ff1920b69c364d061007043?s=70)](https://twitter.com/jdalton "Follow @jdalton on Twitter") |
-|---|
-| [John-David Dalton](http://allyoucanleet.com/) |
-
-## Contributors
-
-| [![twitter/blainebublitz](http://gravatar.com/avatar/ac1c67fd906c9fecd823ce302283b4c1?s=70)](https://twitter.com/blainebublitz "Follow @BlaineBublitz on Twitter") | [![twitter/kitcambridge](http://gravatar.com/avatar/6662a1d02f351b5ef2f8b4d815804661?s=70)](https://twitter.com/kitcambridge "Follow @kitcambridge on Twitter") | [![twitter/mathias](http://gravatar.com/avatar/24e08a9ea84deb17ae121074d0f17125?s=70)](https://twitter.com/mathias "Follow @mathias on Twitter") |
-|---|---|---|
-| [Blaine Bublitz](http://www.iceddev.com/) | [Kit Cambridge](http://kitcambridge.be/) | [Mathias Bynens](http://mathiasbynens.be/) |

convert/lodash/lodash._setbinddata/index.js

@@ -1,43 +0,0 @@
-/**
- * Lo-Dash 2.3.0 (Custom Build) <http://lodash.com/>
- * Build: `lodash modularize modern exports="npm" -o ./npm/`
- * Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
- * Based on Underscore.js 1.5.2 <http://underscorejs.org/LICENSE>
- * Copyright 2009-2013 Jeremy Ashkenas, DocumentCloud and Investigative Reporters & Editors
- * Available under MIT license <http://lodash.com/license>
- */
-var noop = require('./../lodash.noop'),
-    reNative = require('./../lodash._renative');
-
-/** Used as the property descriptor for `__bindData__` */
-var descriptor = {
-  'configurable': false,
-  'enumerable': false,
-  'value': null,
-  'writable': false
-};
-
-/** Used to set meta data on functions */
-var defineProperty = (function() {
-  // IE 8 only accepts DOM elements
-  try {
-    var o = {},
-        func = reNative.test(func = Object.defineProperty) && func,
-        result = func(o, o, o) && func;
-  } catch(e) { }
-  return result;
-}());
-
-/**
- * Sets `this` binding data on a given function.
- *
- * @private
- * @param {Function} func The function to set data on.
- * @param {Array} value The data array to set.
- */
-var setBindData = !defineProperty ? noop : function(func, value) {
-  descriptor.value = value;
-  defineProperty(func, '__bindData__', descriptor);
-};
-
-module.exports = setBindData;

convert/lodash/lodash._setbinddata/package.json

@@ -1,20 +0,0 @@
-{
-  "name": "lodash._setbinddata",
-  "version": "2.3.0",
-  "description": "The internal Lo-Dash function `setBindData` as a Node.js module generated by lodash-cli.",
-  "homepage": "http://lodash.com/custom-builds",
-  "license": "MIT",
-  "author": "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-  "contributors": [
-    "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-    "Blaine Bublitz <blaine@iceddev.com> (http://www.iceddev.com/)",
-    "Kit Cambridge <github@kitcambridge.be> (http://kitcambridge.be/)",
-    "Mathias Bynens <mathias@qiwi.be> (http://mathiasbynens.be/)"
-  ],
-  "bugs": "https://github.com/lodash/lodash-cli/issues",
-  "repository": { "type": "git", "url": "https://github.com/lodash/lodash-cli.git" },
-  "dependencies": {
-    "lodash.noop": "~2.3.0",
-    "lodash._renative": "~2.3.0"
-  }
-}

convert/lodash/lodash._shimkeys/LICENSE.txt

@@ -1,22 +0,0 @@
-Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
-Based on Underscore.js 1.5.2, copyright 2009-2013 Jeremy Ashkenas,
-DocumentCloud and Investigative Reporters & Editors <http://underscorejs.org/>
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

convert/lodash/lodash._shimkeys/README.md

@@ -1,15 +0,0 @@
-# lodash._shimkeys v2.3.0
-
-The internal [Lo-Dash](http://lodash.com/) function `shimKeys` as a [Node.js](http://nodejs.org/) module generated by [lodash-cli](https://npmjs.org/package/lodash-cli).
-
-## Author
-
-| [![twitter/jdalton](http://gravatar.com/avatar/299a3d891ff1920b69c364d061007043?s=70)](https://twitter.com/jdalton "Follow @jdalton on Twitter") |
-|---|
-| [John-David Dalton](http://allyoucanleet.com/) |
-
-## Contributors
-
-| [![twitter/blainebublitz](http://gravatar.com/avatar/ac1c67fd906c9fecd823ce302283b4c1?s=70)](https://twitter.com/blainebublitz "Follow @BlaineBublitz on Twitter") | [![twitter/kitcambridge](http://gravatar.com/avatar/6662a1d02f351b5ef2f8b4d815804661?s=70)](https://twitter.com/kitcambridge "Follow @kitcambridge on Twitter") | [![twitter/mathias](http://gravatar.com/avatar/24e08a9ea84deb17ae121074d0f17125?s=70)](https://twitter.com/mathias "Follow @mathias on Twitter") |
-|---|---|---|
-| [Blaine Bublitz](http://www.iceddev.com/) | [Kit Cambridge](http://kitcambridge.be/) | [Mathias Bynens](http://mathiasbynens.be/) |

convert/lodash/lodash._shimkeys/index.js

@@ -1,38 +0,0 @@
-/**
- * Lo-Dash 2.3.0 (Custom Build) <http://lodash.com/>
- * Build: `lodash modularize modern exports="npm" -o ./npm/`
- * Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
- * Based on Underscore.js 1.5.2 <http://underscorejs.org/LICENSE>
- * Copyright 2009-2013 Jeremy Ashkenas, DocumentCloud and Investigative Reporters & Editors
- * Available under MIT license <http://lodash.com/license>
- */
-var objectTypes = require('./../lodash._objecttypes');
-
-/** Used for native method references */
-var objectProto = Object.prototype;
-
-/** Native method shortcuts */
-var hasOwnProperty = objectProto.hasOwnProperty;
-
-/**
- * A fallback implementation of `Object.keys` which produces an array of the
- * given object's own enumerable property names.
- *
- * @private
- * @type Function
- * @param {Object} object The object to inspect.
- * @returns {Array} Returns an array of property names.
- */
-var shimKeys = function(object) {
-  var index, iterable = object, result = [];
-  if (!iterable) return result;
-  if (!(objectTypes[typeof object])) return result;
-    for (index in iterable) {
-      if (hasOwnProperty.call(iterable, index)) {
-        result.push(index);
-      }
-    }
-  return result
-};
-
-module.exports = shimKeys;

convert/lodash/lodash._shimkeys/package.json

@@ -1,19 +0,0 @@
-{
-  "name": "lodash._shimkeys",
-  "version": "2.3.0",
-  "description": "The internal Lo-Dash function `shimKeys` as a Node.js module generated by lodash-cli.",
-  "homepage": "http://lodash.com/custom-builds",
-  "license": "MIT",
-  "author": "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-  "contributors": [
-    "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-    "Blaine Bublitz <blaine@iceddev.com> (http://www.iceddev.com/)",
-    "Kit Cambridge <github@kitcambridge.be> (http://kitcambridge.be/)",
-    "Mathias Bynens <mathias@qiwi.be> (http://mathiasbynens.be/)"
-  ],
-  "bugs": "https://github.com/lodash/lodash-cli/issues",
-  "repository": { "type": "git", "url": "https://github.com/lodash/lodash-cli.git" },
-  "dependencies": {
-    "lodash._objecttypes": "~2.3.0"
-  }
-}

convert/lodash/lodash._slice/LICENSE.txt

@@ -1,22 +0,0 @@
-Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
-Based on Underscore.js 1.5.2, copyright 2009-2013 Jeremy Ashkenas,
-DocumentCloud and Investigative Reporters & Editors <http://underscorejs.org/>
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

convert/lodash/lodash._slice/README.md

@@ -1,15 +0,0 @@
-# lodash._slice v2.3.0
-
-The internal [Lo-Dash](http://lodash.com/) function `slice` as a [Node.js](http://nodejs.org/) module generated by [lodash-cli](https://npmjs.org/package/lodash-cli).
-
-## Author
-
-| [![twitter/jdalton](http://gravatar.com/avatar/299a3d891ff1920b69c364d061007043?s=70)](https://twitter.com/jdalton "Follow @jdalton on Twitter") |
-|---|
-| [John-David Dalton](http://allyoucanleet.com/) |
-
-## Contributors
-
-| [![twitter/blainebublitz](http://gravatar.com/avatar/ac1c67fd906c9fecd823ce302283b4c1?s=70)](https://twitter.com/blainebublitz "Follow @BlaineBublitz on Twitter") | [![twitter/kitcambridge](http://gravatar.com/avatar/6662a1d02f351b5ef2f8b4d815804661?s=70)](https://twitter.com/kitcambridge "Follow @kitcambridge on Twitter") | [![twitter/mathias](http://gravatar.com/avatar/24e08a9ea84deb17ae121074d0f17125?s=70)](https://twitter.com/mathias "Follow @mathias on Twitter") |
-|---|---|---|
-| [Blaine Bublitz](http://www.iceddev.com/) | [Kit Cambridge](http://kitcambridge.be/) | [Mathias Bynens](http://mathiasbynens.be/) |

convert/lodash/lodash._slice/index.js

@@ -1,38 +0,0 @@
-/**
- * Lo-Dash 2.3.0 (Custom Build) <http://lodash.com/>
- * Build: `lodash modularize modern exports="npm" -o ./npm/`
- * Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
- * Based on Underscore.js 1.5.2 <http://underscorejs.org/LICENSE>
- * Copyright 2009-2013 Jeremy Ashkenas, DocumentCloud and Investigative Reporters & Editors
- * Available under MIT license <http://lodash.com/license>
- */
-
-/**
- * Slices the `collection` from the `start` index up to, but not including,
- * the `end` index.
- *
- * Note: This function is used instead of `Array#slice` to support node lists
- * in IE < 9 and to ensure dense arrays are returned.
- *
- * @private
- * @param {Array|Object|string} collection The collection to slice.
- * @param {number} start The start index.
- * @param {number} end The end index.
- * @returns {Array} Returns the new array.
- */
-function slice(array, start, end) {
-  start || (start = 0);
-  if (typeof end == 'undefined') {
-    end = array ? array.length : 0;
-  }
-  var index = -1,
-      length = end - start || 0,
-      result = Array(length < 0 ? 0 : length);
-
-  while (++index < length) {
-    result[index] = array[start + index];
-  }
-  return result;
-}
-
-module.exports = slice;

convert/lodash/lodash._slice/package.json

@@ -1,16 +0,0 @@
-{
-  "name": "lodash._slice",
-  "version": "2.3.0",
-  "description": "The internal Lo-Dash function `slice` as a Node.js module generated by lodash-cli.",
-  "homepage": "http://lodash.com/custom-builds",
-  "license": "MIT",
-  "author": "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-  "contributors": [
-    "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-    "Blaine Bublitz <blaine@iceddev.com> (http://www.iceddev.com/)",
-    "Kit Cambridge <github@kitcambridge.be> (http://kitcambridge.be/)",
-    "Mathias Bynens <mathias@qiwi.be> (http://mathiasbynens.be/)"
-  ],
-  "bugs": "https://github.com/lodash/lodash-cli/issues",
-  "repository": { "type": "git", "url": "https://github.com/lodash/lodash-cli.git" }
-}

convert/lodash/lodash.bind/LICENSE.txt

@@ -1,22 +0,0 @@
-Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
-Based on Underscore.js 1.5.2, copyright 2009-2013 Jeremy Ashkenas,
-DocumentCloud and Investigative Reporters & Editors <http://underscorejs.org/>
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

convert/lodash/lodash.bind/README.md

@@ -1,15 +0,0 @@
-# lodash.bind v2.3.0
-
-The [Lo-Dash](http://lodash.com/) function [`_.bind`](http://lodash.com/docs#bind) as a [Node.js](http://nodejs.org/) module generated by [lodash-cli](https://npmjs.org/package/lodash-cli).
-
-## Author
-
-| [![twitter/jdalton](http://gravatar.com/avatar/299a3d891ff1920b69c364d061007043?s=70)](https://twitter.com/jdalton "Follow @jdalton on Twitter") |
-|---|
-| [John-David Dalton](http://allyoucanleet.com/) |
-
-## Contributors
-
-| [![twitter/blainebublitz](http://gravatar.com/avatar/ac1c67fd906c9fecd823ce302283b4c1?s=70)](https://twitter.com/blainebublitz "Follow @BlaineBublitz on Twitter") | [![twitter/kitcambridge](http://gravatar.com/avatar/6662a1d02f351b5ef2f8b4d815804661?s=70)](https://twitter.com/kitcambridge "Follow @kitcambridge on Twitter") | [![twitter/mathias](http://gravatar.com/avatar/24e08a9ea84deb17ae121074d0f17125?s=70)](https://twitter.com/mathias "Follow @mathias on Twitter") |
-|---|---|---|
-| [Blaine Bublitz](http://www.iceddev.com/) | [Kit Cambridge](http://kitcambridge.be/) | [Mathias Bynens](http://mathiasbynens.be/) |

convert/lodash/lodash.bind/index.js

@@ -1,41 +0,0 @@
-/**
- * Lo-Dash 2.3.0 (Custom Build) <http://lodash.com/>
- * Build: `lodash modularize modern exports="npm" -o ./npm/`
- * Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
- * Based on Underscore.js 1.5.2 <http://underscorejs.org/LICENSE>
- * Copyright 2009-2013 Jeremy Ashkenas, DocumentCloud and Investigative Reporters & Editors
- * Available under MIT license <http://lodash.com/license>
- */
-var createWrapper = require('./../lodash._createwrapper'),
-    reNative = require('./../lodash._renative'),
-    slice = require('./../lodash._slice');
-
-/**
- * Creates a function that, when called, invokes `func` with the `this`
- * binding of `thisArg` and prepends any additional `bind` arguments to those
- * provided to the bound function.
- *
- * @static
- * @memberOf _
- * @category Functions
- * @param {Function} func The function to bind.
- * @param {*} [thisArg] The `this` binding of `func`.
- * @param {...*} [arg] Arguments to be partially applied.
- * @returns {Function} Returns the new bound function.
- * @example
- *
- * var func = function(greeting) {
- *   return greeting + ' ' + this.name;
- * };
- *
- * func = _.bind(func, { 'name': 'fred' }, 'hi');
- * func();
- * // => 'hi fred'
- */
-function bind(func, thisArg) {
-  return arguments.length > 2
-    ? createWrapper(func, 17, slice(arguments, 2), null, thisArg)
-    : createWrapper(func, 1, null, null, thisArg);
-}
-
-module.exports = bind;

convert/lodash/lodash.bind/package.json

@@ -1,22 +0,0 @@
-{
-  "name": "lodash.bind",
-  "version": "2.3.0",
-  "description": "The Lo-Dash function `_.bind` as a Node.js module generated by lodash-cli.",
-  "homepage": "http://lodash.com/custom-builds",
-  "license": "MIT",
-  "keywords": ["functional", "lodash", "lodash-modularized", "server", "util"],
-  "author": "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-  "contributors": [
-    "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-    "Blaine Bublitz <blaine@iceddev.com> (http://www.iceddev.com/)",
-    "Kit Cambridge <github@kitcambridge.be> (http://kitcambridge.be/)",
-    "Mathias Bynens <mathias@qiwi.be> (http://mathiasbynens.be/)"
-  ],
-  "bugs": "https://github.com/lodash/lodash-cli/issues",
-  "repository": { "type": "git", "url": "https://github.com/lodash/lodash-cli.git" },
-  "dependencies": {
-    "lodash._createwrapper": "~2.3.0",
-    "lodash._renative": "~2.3.0",
-    "lodash._slice": "~2.3.0"
-  }
-}

convert/lodash/lodash.foreach/LICENSE.txt

@@ -1,22 +0,0 @@
-Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
-Based on Underscore.js 1.5.2, copyright 2009-2013 Jeremy Ashkenas,
-DocumentCloud and Investigative Reporters & Editors <http://underscorejs.org/>
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

convert/lodash/lodash.foreach/README.md

@@ -1,15 +0,0 @@
-# lodash.foreach v2.3.0
-
-The [Lo-Dash](http://lodash.com/) function [`_.forEach`](http://lodash.com/docs#forEach) as a [Node.js](http://nodejs.org/) module generated by [lodash-cli](https://npmjs.org/package/lodash-cli).
-
-## Author
-
-| [![twitter/jdalton](http://gravatar.com/avatar/299a3d891ff1920b69c364d061007043?s=70)](https://twitter.com/jdalton "Follow @jdalton on Twitter") |
-|---|
-| [John-David Dalton](http://allyoucanleet.com/) |
-
-## Contributors
-
-| [![twitter/blainebublitz](http://gravatar.com/avatar/ac1c67fd906c9fecd823ce302283b4c1?s=70)](https://twitter.com/blainebublitz "Follow @BlaineBublitz on Twitter") | [![twitter/kitcambridge](http://gravatar.com/avatar/6662a1d02f351b5ef2f8b4d815804661?s=70)](https://twitter.com/kitcambridge "Follow @kitcambridge on Twitter") | [![twitter/mathias](http://gravatar.com/avatar/24e08a9ea84deb17ae121074d0f17125?s=70)](https://twitter.com/mathias "Follow @mathias on Twitter") |
-|---|---|---|
-| [Blaine Bublitz](http://www.iceddev.com/) | [Kit Cambridge](http://kitcambridge.be/) | [Mathias Bynens](http://mathiasbynens.be/) |

convert/lodash/lodash.foreach/index.js

@@ -1,55 +0,0 @@
-/**
- * Lo-Dash 2.3.0 (Custom Build) <http://lodash.com/>
- * Build: `lodash modularize modern exports="npm" -o ./npm/`
- * Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
- * Based on Underscore.js 1.5.2 <http://underscorejs.org/LICENSE>
- * Copyright 2009-2013 Jeremy Ashkenas, DocumentCloud and Investigative Reporters & Editors
- * Available under MIT license <http://lodash.com/license>
- */
-var baseCreateCallback = require('./../lodash._basecreatecallback'),
-    forOwn = require('./../lodash.forown');
-
-/**
- * Iterates over elements of a collection, executing the callback for each
- * element. The callback is bound to `thisArg` and invoked with three arguments;
- * (value, index|key, collection). Callbacks may exit iteration early by
- * explicitly returning `false`.
- *
- * Note: As with other "Collections" methods, objects with a `length` property
- * are iterated like arrays. To avoid this behavior `_.forIn` or `_.forOwn`
- * may be used for object iteration.
- *
- * @static
- * @memberOf _
- * @alias each
- * @category Collections
- * @param {Array|Object|string} collection The collection to iterate over.
- * @param {Function} [callback=identity] The function called per iteration.
- * @param {*} [thisArg] The `this` binding of `callback`.
- * @returns {Array|Object|string} Returns `collection`.
- * @example
- *
- * _([1, 2, 3]).forEach(function(num) { console.log(num); }).join(',');
- * // => logs each number and returns '1,2,3'
- *
- * _.forEach({ 'one': 1, 'two': 2, 'three': 3 }, function(num) { console.log(num); });
- * // => logs each number and returns the object (property order is not guaranteed across environments)
- */
-function forEach(collection, callback, thisArg) {
-  var index = -1,
-      length = collection ? collection.length : 0;
-
-  callback = callback && typeof thisArg == 'undefined' ? callback : baseCreateCallback(callback, thisArg, 3);
-  if (typeof length == 'number') {
-    while (++index < length) {
-      if (callback(collection[index], index, collection) === false) {
-        break;
-      }
-    }
-  } else {
-    forOwn(collection, callback);
-  }
-  return collection;
-}
-
-module.exports = forEach;

convert/lodash/lodash.foreach/package.json

@@ -1,21 +0,0 @@
-{
-  "name": "lodash.foreach",
-  "version": "2.3.0",
-  "description": "The Lo-Dash function `_.forEach` as a Node.js module generated by lodash-cli.",
-  "homepage": "http://lodash.com/custom-builds",
-  "license": "MIT",
-  "keywords": ["functional", "lodash", "lodash-modularized", "server", "util"],
-  "author": "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-  "contributors": [
-    "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-    "Blaine Bublitz <blaine@iceddev.com> (http://www.iceddev.com/)",
-    "Kit Cambridge <github@kitcambridge.be> (http://kitcambridge.be/)",
-    "Mathias Bynens <mathias@qiwi.be> (http://mathiasbynens.be/)"
-  ],
-  "bugs": "https://github.com/lodash/lodash-cli/issues",
-  "repository": { "type": "git", "url": "https://github.com/lodash/lodash-cli.git" },
-  "dependencies": {
-    "lodash._basecreatecallback": "~2.3.0",
-    "lodash.forown": "~2.3.0"
-  }
-}

convert/lodash/lodash.forown/LICENSE.txt

@@ -1,22 +0,0 @@
-Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
-Based on Underscore.js 1.5.2, copyright 2009-2013 Jeremy Ashkenas,
-DocumentCloud and Investigative Reporters & Editors <http://underscorejs.org/>
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

convert/lodash/lodash.forown/README.md

@@ -1,15 +0,0 @@
-# lodash.forown v2.3.0
-
-The [Lo-Dash](http://lodash.com/) function [`_.forOwn`](http://lodash.com/docs#forOwn) as a [Node.js](http://nodejs.org/) module generated by [lodash-cli](https://npmjs.org/package/lodash-cli).
-
-## Author
-
-| [![twitter/jdalton](http://gravatar.com/avatar/299a3d891ff1920b69c364d061007043?s=70)](https://twitter.com/jdalton "Follow @jdalton on Twitter") |
-|---|
-| [John-David Dalton](http://allyoucanleet.com/) |
-
-## Contributors
-
-| [![twitter/blainebublitz](http://gravatar.com/avatar/ac1c67fd906c9fecd823ce302283b4c1?s=70)](https://twitter.com/blainebublitz "Follow @BlaineBublitz on Twitter") | [![twitter/kitcambridge](http://gravatar.com/avatar/6662a1d02f351b5ef2f8b4d815804661?s=70)](https://twitter.com/kitcambridge "Follow @kitcambridge on Twitter") | [![twitter/mathias](http://gravatar.com/avatar/24e08a9ea84deb17ae121074d0f17125?s=70)](https://twitter.com/mathias "Follow @mathias on Twitter") |
-|---|---|---|
-| [Blaine Bublitz](http://www.iceddev.com/) | [Kit Cambridge](http://kitcambridge.be/) | [Mathias Bynens](http://mathiasbynens.be/) |

convert/lodash/lodash.forown/index.js

@@ -1,50 +0,0 @@
-/**
- * Lo-Dash 2.3.0 (Custom Build) <http://lodash.com/>
- * Build: `lodash modularize modern exports="npm" -o ./npm/`
- * Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
- * Based on Underscore.js 1.5.2 <http://underscorejs.org/LICENSE>
- * Copyright 2009-2013 Jeremy Ashkenas, DocumentCloud and Investigative Reporters & Editors
- * Available under MIT license <http://lodash.com/license>
- */
-var baseCreateCallback = require('./../lodash._basecreatecallback'),
-    keys = require('./../lodash.keys'),
-    objectTypes = require('./../lodash._objecttypes');
-
-/**
- * Iterates over own enumerable properties of an object, executing the callback
- * for each property. The callback is bound to `thisArg` and invoked with three
- * arguments; (value, key, object). Callbacks may exit iteration early by
- * explicitly returning `false`.
- *
- * @static
- * @memberOf _
- * @type Function
- * @category Objects
- * @param {Object} object The object to iterate over.
- * @param {Function} [callback=identity] The function called per iteration.
- * @param {*} [thisArg] The `this` binding of `callback`.
- * @returns {Object} Returns `object`.
- * @example
- *
- * _.forOwn({ '0': 'zero', '1': 'one', 'length': 2 }, function(num, key) {
- *   console.log(key);
- * });
- * // => logs '0', '1', and 'length' (property order is not guaranteed across environments)
- */
-var forOwn = function(collection, callback, thisArg) {
-  var index, iterable = collection, result = iterable;
-  if (!iterable) return result;
-  if (!objectTypes[typeof iterable]) return result;
-  callback = callback && typeof thisArg == 'undefined' ? callback : baseCreateCallback(callback, thisArg, 3);
-    var ownIndex = -1,
-        ownProps = objectTypes[typeof iterable] && keys(iterable),
-        length = ownProps ? ownProps.length : 0;
-
-    while (++ownIndex < length) {
-      index = ownProps[ownIndex];
-      if (callback(iterable[index], index, collection) === false) return result;
-    }
-  return result
-};
-
-module.exports = forOwn;

convert/lodash/lodash.forown/package.json

@@ -1,22 +0,0 @@
-{
-  "name": "lodash.forown",
-  "version": "2.3.0",
-  "description": "The Lo-Dash function `_.forOwn` as a Node.js module generated by lodash-cli.",
-  "homepage": "http://lodash.com/custom-builds",
-  "license": "MIT",
-  "keywords": ["functional", "lodash", "lodash-modularized", "server", "util"],
-  "author": "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-  "contributors": [
-    "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-    "Blaine Bublitz <blaine@iceddev.com> (http://www.iceddev.com/)",
-    "Kit Cambridge <github@kitcambridge.be> (http://kitcambridge.be/)",
-    "Mathias Bynens <mathias@qiwi.be> (http://mathiasbynens.be/)"
-  ],
-  "bugs": "https://github.com/lodash/lodash-cli/issues",
-  "repository": { "type": "git", "url": "https://github.com/lodash/lodash-cli.git" },
-  "dependencies": {
-    "lodash._basecreatecallback": "~2.3.0",
-    "lodash.keys": "~2.3.0",
-    "lodash._objecttypes": "~2.3.0"
-  }
-}

convert/lodash/lodash.identity/LICENSE.txt

@@ -1,22 +0,0 @@
-Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
-Based on Underscore.js 1.5.2, copyright 2009-2013 Jeremy Ashkenas,
-DocumentCloud and Investigative Reporters & Editors <http://underscorejs.org/>
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

convert/lodash/lodash.identity/README.md

@@ -1,15 +0,0 @@
-# lodash.identity v2.3.0
-
-The [Lo-Dash](http://lodash.com/) function [`_.identity`](http://lodash.com/docs#identity) as a [Node.js](http://nodejs.org/) module generated by [lodash-cli](https://npmjs.org/package/lodash-cli).
-
-## Author
-
-| [![twitter/jdalton](http://gravatar.com/avatar/299a3d891ff1920b69c364d061007043?s=70)](https://twitter.com/jdalton "Follow @jdalton on Twitter") |
-|---|
-| [John-David Dalton](http://allyoucanleet.com/) |
-
-## Contributors
-
-| [![twitter/blainebublitz](http://gravatar.com/avatar/ac1c67fd906c9fecd823ce302283b4c1?s=70)](https://twitter.com/blainebublitz "Follow @BlaineBublitz on Twitter") | [![twitter/kitcambridge](http://gravatar.com/avatar/6662a1d02f351b5ef2f8b4d815804661?s=70)](https://twitter.com/kitcambridge "Follow @kitcambridge on Twitter") | [![twitter/mathias](http://gravatar.com/avatar/24e08a9ea84deb17ae121074d0f17125?s=70)](https://twitter.com/mathias "Follow @mathias on Twitter") |
-|---|---|---|
-| [Blaine Bublitz](http://www.iceddev.com/) | [Kit Cambridge](http://kitcambridge.be/) | [Mathias Bynens](http://mathiasbynens.be/) |

convert/lodash/lodash.identity/index.js

@@ -1,28 +0,0 @@
-/**
- * Lo-Dash 2.3.0 (Custom Build) <http://lodash.com/>
- * Build: `lodash modularize modern exports="npm" -o ./npm/`
- * Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
- * Based on Underscore.js 1.5.2 <http://underscorejs.org/LICENSE>
- * Copyright 2009-2013 Jeremy Ashkenas, DocumentCloud and Investigative Reporters & Editors
- * Available under MIT license <http://lodash.com/license>
- */
-
-/**
- * This method returns the first argument provided to it.
- *
- * @static
- * @memberOf _
- * @category Utilities
- * @param {*} value Any value.
- * @returns {*} Returns `value`.
- * @example
- *
- * var object = { 'name': 'fred' };
- * _.identity(object) === object;
- * // => true
- */
-function identity(value) {
-  return value;
-}
-
-module.exports = identity;

convert/lodash/lodash.identity/package.json

@@ -1,17 +0,0 @@
-{
-  "name": "lodash.identity",
-  "version": "2.3.0",
-  "description": "The Lo-Dash function `_.identity` as a Node.js module generated by lodash-cli.",
-  "homepage": "http://lodash.com/custom-builds",
-  "license": "MIT",
-  "keywords": ["functional", "lodash", "lodash-modularized", "server", "util"],
-  "author": "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-  "contributors": [
-    "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-    "Blaine Bublitz <blaine@iceddev.com> (http://www.iceddev.com/)",
-    "Kit Cambridge <github@kitcambridge.be> (http://kitcambridge.be/)",
-    "Mathias Bynens <mathias@qiwi.be> (http://mathiasbynens.be/)"
-  ],
-  "bugs": "https://github.com/lodash/lodash-cli/issues",
-  "repository": { "type": "git", "url": "https://github.com/lodash/lodash-cli.git" }
-}

convert/lodash/lodash.isfunction/LICENSE.txt

@@ -1,22 +0,0 @@
-Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
-Based on Underscore.js 1.5.2, copyright 2009-2013 Jeremy Ashkenas,
-DocumentCloud and Investigative Reporters & Editors <http://underscorejs.org/>
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

convert/lodash/lodash.isfunction/README.md

@@ -1,15 +0,0 @@
-# lodash.isfunction v2.3.0
-
-The [Lo-Dash](http://lodash.com/) function [`_.isFunction`](http://lodash.com/docs#isFunction) as a [Node.js](http://nodejs.org/) module generated by [lodash-cli](https://npmjs.org/package/lodash-cli).
-
-## Author
-
-| [![twitter/jdalton](http://gravatar.com/avatar/299a3d891ff1920b69c364d061007043?s=70)](https://twitter.com/jdalton "Follow @jdalton on Twitter") |
-|---|
-| [John-David Dalton](http://allyoucanleet.com/) |
-
-## Contributors
-
-| [![twitter/blainebublitz](http://gravatar.com/avatar/ac1c67fd906c9fecd823ce302283b4c1?s=70)](https://twitter.com/blainebublitz "Follow @BlaineBublitz on Twitter") | [![twitter/kitcambridge](http://gravatar.com/avatar/6662a1d02f351b5ef2f8b4d815804661?s=70)](https://twitter.com/kitcambridge "Follow @kitcambridge on Twitter") | [![twitter/mathias](http://gravatar.com/avatar/24e08a9ea84deb17ae121074d0f17125?s=70)](https://twitter.com/mathias "Follow @mathias on Twitter") |
-|---|---|---|
-| [Blaine Bublitz](http://www.iceddev.com/) | [Kit Cambridge](http://kitcambridge.be/) | [Mathias Bynens](http://mathiasbynens.be/) |

convert/lodash/lodash.isfunction/index.js

@@ -1,27 +0,0 @@
-/**
- * Lo-Dash 2.3.0 (Custom Build) <http://lodash.com/>
- * Build: `lodash modularize modern exports="npm" -o ./npm/`
- * Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
- * Based on Underscore.js 1.5.2 <http://underscorejs.org/LICENSE>
- * Copyright 2009-2013 Jeremy Ashkenas, DocumentCloud and Investigative Reporters & Editors
- * Available under MIT license <http://lodash.com/license>
- */
-
-/**
- * Checks if `value` is a function.
- *
- * @static
- * @memberOf _
- * @category Objects
- * @param {*} value The value to check.
- * @returns {boolean} Returns `true` if the `value` is a function, else `false`.
- * @example
- *
- * _.isFunction(_);
- * // => true
- */
-function isFunction(value) {
-  return typeof value == 'function';
-}
-
-module.exports = isFunction;

convert/lodash/lodash.isfunction/package.json

@@ -1,17 +0,0 @@
-{
-  "name": "lodash.isfunction",
-  "version": "2.3.0",
-  "description": "The Lo-Dash function `_.isFunction` as a Node.js module generated by lodash-cli.",
-  "homepage": "http://lodash.com/custom-builds",
-  "license": "MIT",
-  "keywords": ["functional", "lodash", "lodash-modularized", "server", "util"],
-  "author": "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-  "contributors": [
-    "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-    "Blaine Bublitz <blaine@iceddev.com> (http://www.iceddev.com/)",
-    "Kit Cambridge <github@kitcambridge.be> (http://kitcambridge.be/)",
-    "Mathias Bynens <mathias@qiwi.be> (http://mathiasbynens.be/)"
-  ],
-  "bugs": "https://github.com/lodash/lodash-cli/issues",
-  "repository": { "type": "git", "url": "https://github.com/lodash/lodash-cli.git" }
-}

convert/lodash/lodash.isobject/LICENSE.txt

@@ -1,22 +0,0 @@
-Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
-Based on Underscore.js 1.5.2, copyright 2009-2013 Jeremy Ashkenas,
-DocumentCloud and Investigative Reporters & Editors <http://underscorejs.org/>
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

convert/lodash/lodash.isobject/README.md

@@ -1,15 +0,0 @@
-# lodash.isobject v2.3.0
-
-The [Lo-Dash](http://lodash.com/) function [`_.isObject`](http://lodash.com/docs#isObject) as a [Node.js](http://nodejs.org/) module generated by [lodash-cli](https://npmjs.org/package/lodash-cli).
-
-## Author
-
-| [![twitter/jdalton](http://gravatar.com/avatar/299a3d891ff1920b69c364d061007043?s=70)](https://twitter.com/jdalton "Follow @jdalton on Twitter") |
-|---|
-| [John-David Dalton](http://allyoucanleet.com/) |
-
-## Contributors
-
-| [![twitter/blainebublitz](http://gravatar.com/avatar/ac1c67fd906c9fecd823ce302283b4c1?s=70)](https://twitter.com/blainebublitz "Follow @BlaineBublitz on Twitter") | [![twitter/kitcambridge](http://gravatar.com/avatar/6662a1d02f351b5ef2f8b4d815804661?s=70)](https://twitter.com/kitcambridge "Follow @kitcambridge on Twitter") | [![twitter/mathias](http://gravatar.com/avatar/24e08a9ea84deb17ae121074d0f17125?s=70)](https://twitter.com/mathias "Follow @mathias on Twitter") |
-|---|---|---|
-| [Blaine Bublitz](http://www.iceddev.com/) | [Kit Cambridge](http://kitcambridge.be/) | [Mathias Bynens](http://mathiasbynens.be/) |

convert/lodash/lodash.isobject/index.js

@@ -1,39 +0,0 @@
-/**
- * Lo-Dash 2.3.0 (Custom Build) <http://lodash.com/>
- * Build: `lodash modularize modern exports="npm" -o ./npm/`
- * Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
- * Based on Underscore.js 1.5.2 <http://underscorejs.org/LICENSE>
- * Copyright 2009-2013 Jeremy Ashkenas, DocumentCloud and Investigative Reporters & Editors
- * Available under MIT license <http://lodash.com/license>
- */
-var objectTypes = require('./../lodash._objecttypes');
-
-/**
- * Checks if `value` is the language type of Object.
- * (e.g. arrays, functions, objects, regexes, `new Number(0)`, and `new String('')`)
- *
- * @static
- * @memberOf _
- * @category Objects
- * @param {*} value The value to check.
- * @returns {boolean} Returns `true` if the `value` is an object, else `false`.
- * @example
- *
- * _.isObject({});
- * // => true
- *
- * _.isObject([1, 2, 3]);
- * // => true
- *
- * _.isObject(1);
- * // => false
- */
-function isObject(value) {
-  // check if the value is the ECMAScript language type of Object
-  // http://es5.github.io/#x8
-  // and avoid a V8 bug
-  // http://code.google.com/p/v8/issues/detail?id=2291
-  return !!(value && objectTypes[typeof value]);
-}
-
-module.exports = isObject;

convert/lodash/lodash.isobject/package.json

@@ -1,20 +0,0 @@
-{
-  "name": "lodash.isobject",
-  "version": "2.3.0",
-  "description": "The Lo-Dash function `_.isObject` as a Node.js module generated by lodash-cli.",
-  "homepage": "http://lodash.com/custom-builds",
-  "license": "MIT",
-  "keywords": ["functional", "lodash", "lodash-modularized", "server", "util"],
-  "author": "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-  "contributors": [
-    "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-    "Blaine Bublitz <blaine@iceddev.com> (http://www.iceddev.com/)",
-    "Kit Cambridge <github@kitcambridge.be> (http://kitcambridge.be/)",
-    "Mathias Bynens <mathias@qiwi.be> (http://mathiasbynens.be/)"
-  ],
-  "bugs": "https://github.com/lodash/lodash-cli/issues",
-  "repository": { "type": "git", "url": "https://github.com/lodash/lodash-cli.git" },
-  "dependencies": {
-    "lodash._objecttypes": "~2.3.0"
-  }
-}

convert/lodash/lodash.keys/LICENSE.txt

@@ -1,22 +0,0 @@
-Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
-Based on Underscore.js 1.5.2, copyright 2009-2013 Jeremy Ashkenas,
-DocumentCloud and Investigative Reporters & Editors <http://underscorejs.org/>
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

convert/lodash/lodash.keys/README.md

@@ -1,15 +0,0 @@
-# lodash.keys v2.3.0
-
-The [Lo-Dash](http://lodash.com/) function [`_.keys`](http://lodash.com/docs#keys) as a [Node.js](http://nodejs.org/) module generated by [lodash-cli](https://npmjs.org/package/lodash-cli).
-
-## Author
-
-| [![twitter/jdalton](http://gravatar.com/avatar/299a3d891ff1920b69c364d061007043?s=70)](https://twitter.com/jdalton "Follow @jdalton on Twitter") |
-|---|
-| [John-David Dalton](http://allyoucanleet.com/) |
-
-## Contributors
-
-| [![twitter/blainebublitz](http://gravatar.com/avatar/ac1c67fd906c9fecd823ce302283b4c1?s=70)](https://twitter.com/blainebublitz "Follow @BlaineBublitz on Twitter") | [![twitter/kitcambridge](http://gravatar.com/avatar/6662a1d02f351b5ef2f8b4d815804661?s=70)](https://twitter.com/kitcambridge "Follow @kitcambridge on Twitter") | [![twitter/mathias](http://gravatar.com/avatar/24e08a9ea84deb17ae121074d0f17125?s=70)](https://twitter.com/mathias "Follow @mathias on Twitter") |
-|---|---|---|
-| [Blaine Bublitz](http://www.iceddev.com/) | [Kit Cambridge](http://kitcambridge.be/) | [Mathias Bynens](http://mathiasbynens.be/) |

convert/lodash/lodash.keys/index.js

@@ -1,36 +0,0 @@
-/**
- * Lo-Dash 2.3.0 (Custom Build) <http://lodash.com/>
- * Build: `lodash modularize modern exports="npm" -o ./npm/`
- * Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
- * Based on Underscore.js 1.5.2 <http://underscorejs.org/LICENSE>
- * Copyright 2009-2013 Jeremy Ashkenas, DocumentCloud and Investigative Reporters & Editors
- * Available under MIT license <http://lodash.com/license>
- */
-var isObject = require('./../lodash.isobject'),
-    reNative = require('./../lodash._renative'),
-    shimKeys = require('./../lodash._shimkeys');
-
-/* Native method shortcuts for methods with the same name as other `lodash` methods */
-var nativeKeys = reNative.test(nativeKeys = Object.keys) && nativeKeys;
-
-/**
- * Creates an array composed of the own enumerable property names of an object.
- *
- * @static
- * @memberOf _
- * @category Objects
- * @param {Object} object The object to inspect.
- * @returns {Array} Returns an array of property names.
- * @example
- *
- * _.keys({ 'one': 1, 'two': 2, 'three': 3 });
- * // => ['one', 'two', 'three'] (property order is not guaranteed across environments)
- */
-var keys = !nativeKeys ? shimKeys : function(object) {
-  if (!isObject(object)) {
-    return [];
-  }
-  return nativeKeys(object);
-};
-
-module.exports = keys;

convert/lodash/lodash.keys/package.json

@@ -1,22 +0,0 @@
-{
-  "name": "lodash.keys",
-  "version": "2.3.0",
-  "description": "The Lo-Dash function `_.keys` as a Node.js module generated by lodash-cli.",
-  "homepage": "http://lodash.com/custom-builds",
-  "license": "MIT",
-  "keywords": ["functional", "lodash", "lodash-modularized", "server", "util"],
-  "author": "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-  "contributors": [
-    "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-    "Blaine Bublitz <blaine@iceddev.com> (http://www.iceddev.com/)",
-    "Kit Cambridge <github@kitcambridge.be> (http://kitcambridge.be/)",
-    "Mathias Bynens <mathias@qiwi.be> (http://mathiasbynens.be/)"
-  ],
-  "bugs": "https://github.com/lodash/lodash-cli/issues",
-  "repository": { "type": "git", "url": "https://github.com/lodash/lodash-cli.git" },
-  "dependencies": {
-    "lodash.isobject": "~2.3.0",
-    "lodash._renative": "~2.3.0",
-    "lodash._shimkeys": "~2.3.0"
-  }
-}

convert/lodash/lodash.noop/LICENSE.txt

@@ -1,22 +0,0 @@
-Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
-Based on Underscore.js 1.5.2, copyright 2009-2013 Jeremy Ashkenas,
-DocumentCloud and Investigative Reporters & Editors <http://underscorejs.org/>
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

convert/lodash/lodash.noop/README.md

@@ -1,15 +0,0 @@
-# lodash.noop v2.3.0
-
-The [Lo-Dash](http://lodash.com/) function [`_.noop`](http://lodash.com/docs#noop) as a [Node.js](http://nodejs.org/) module generated by [lodash-cli](https://npmjs.org/package/lodash-cli).
-
-## Author
-
-| [![twitter/jdalton](http://gravatar.com/avatar/299a3d891ff1920b69c364d061007043?s=70)](https://twitter.com/jdalton "Follow @jdalton on Twitter") |
-|---|
-| [John-David Dalton](http://allyoucanleet.com/) |
-
-## Contributors
-
-| [![twitter/blainebublitz](http://gravatar.com/avatar/ac1c67fd906c9fecd823ce302283b4c1?s=70)](https://twitter.com/blainebublitz "Follow @BlaineBublitz on Twitter") | [![twitter/kitcambridge](http://gravatar.com/avatar/6662a1d02f351b5ef2f8b4d815804661?s=70)](https://twitter.com/kitcambridge "Follow @kitcambridge on Twitter") | [![twitter/mathias](http://gravatar.com/avatar/24e08a9ea84deb17ae121074d0f17125?s=70)](https://twitter.com/mathias "Follow @mathias on Twitter") |
-|---|---|---|
-| [Blaine Bublitz](http://www.iceddev.com/) | [Kit Cambridge](http://kitcambridge.be/) | [Mathias Bynens](http://mathiasbynens.be/) |

convert/lodash/lodash.noop/index.js

@@ -1,26 +0,0 @@
-/**
- * Lo-Dash 2.3.0 (Custom Build) <http://lodash.com/>
- * Build: `lodash modularize modern exports="npm" -o ./npm/`
- * Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
- * Based on Underscore.js 1.5.2 <http://underscorejs.org/LICENSE>
- * Copyright 2009-2013 Jeremy Ashkenas, DocumentCloud and Investigative Reporters & Editors
- * Available under MIT license <http://lodash.com/license>
- */
-
-/**
- * A no-operation function.
- *
- * @static
- * @memberOf _
- * @category Utilities
- * @example
- *
- * var object = { 'name': 'fred' };
- * _.noop(object) === undefined;
- * // => true
- */
-function noop() {
-  // no operation performed
-}
-
-module.exports = noop;

convert/lodash/lodash.noop/package.json

@@ -1,17 +0,0 @@
-{
-  "name": "lodash.noop",
-  "version": "2.3.0",
-  "description": "The Lo-Dash function `_.noop` as a Node.js module generated by lodash-cli.",
-  "homepage": "http://lodash.com/custom-builds",
-  "license": "MIT",
-  "keywords": ["functional", "lodash", "lodash-modularized", "server", "util"],
-  "author": "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-  "contributors": [
-    "John-David Dalton <john.david.dalton@gmail.com> (http://allyoucanleet.com/)",
-    "Blaine Bublitz <blaine@iceddev.com> (http://www.iceddev.com/)",
-    "Kit Cambridge <github@kitcambridge.be> (http://kitcambridge.be/)",
-    "Mathias Bynens <mathias@qiwi.be> (http://mathiasbynens.be/)"
-  ],
-  "bugs": "https://github.com/lodash/lodash-cli/issues",
-  "repository": { "type": "git", "url": "https://github.com/lodash/lodash-cli.git" }
-}

convert/lodash/lodash.support/LICENSE.txt

@@ -1,22 +0,0 @@
-Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
-Based on Underscore.js 1.5.2, copyright 2009-2013 Jeremy Ashkenas,
-DocumentCloud and Investigative Reporters & Editors <http://underscorejs.org/>
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

convert/lodash/lodash.support/README.md

@@ -1,15 +0,0 @@
-# lodash.support v2.3.0
-
-The [Lo-Dash](http://lodash.com/) object [`_.support`](http://lodash.com/docs#support) as a [Node.js](http://nodejs.org/) module generated by [lodash-cli](https://npmjs.org/package/lodash-cli).
-
-## Author
-
-| [![twitter/jdalton](http://gravatar.com/avatar/299a3d891ff1920b69c364d061007043?s=70)](https://twitter.com/jdalton "Follow @jdalton on Twitter") |
-|---|
-| [John-David Dalton](http://allyoucanleet.com/) |
-
-## Contributors
-
-| [![twitter/blainebublitz](http://gravatar.com/avatar/ac1c67fd906c9fecd823ce302283b4c1?s=70)](https://twitter.com/blainebublitz "Follow @BlaineBublitz on Twitter") | [![twitter/kitcambridge](http://gravatar.com/avatar/6662a1d02f351b5ef2f8b4d815804661?s=70)](https://twitter.com/kitcambridge "Follow @kitcambridge on Twitter") | [![twitter/mathias](http://gravatar.com/avatar/24e08a9ea84deb17ae121074d0f17125?s=70)](https://twitter.com/mathias "Follow @mathias on Twitter") |
-|---|---|---|
-| [Blaine Bublitz](http://www.iceddev.com/) | [Kit Cambridge](http://kitcambridge.be/) | [Mathias Bynens](http://mathiasbynens.be/) |

convert/lodash/lodash.support/index.js

@@ -1,40 +0,0 @@
-/**
- * Lo-Dash 2.3.0 (Custom Build) <http://lodash.com/>
- * Build: `lodash modularize modern exports="npm" -o ./npm/`
- * Copyright 2012-2013 The Dojo Foundation <http://dojofoundation.org/>
- * Based on Underscore.js 1.5.2 <http://underscorejs.org/LICENSE>
- * Copyright 2009-2013 Jeremy Ashkenas, DocumentCloud and Investigative Reporters & Editors
- * Available under MIT license <http://lodash.com/license>
- */
-var reNative = require('./../lodash._renative');
-
-/** Used to detect functions containing a `this` reference */
-var reThis = /\bthis\b/;
-
-/**
- * An object used to flag environments features.
- *
- * @static
- * @memberOf _
- * @type Object
- */
-var support = {};
-
-/**
- * Detect if functions can be decompiled by `Function#toString`
- * (all but PS3 and older Opera mobile browsers & avoided in Windows 8 apps).
- *
- * @memberOf _.support
- * @type boolean
- */
-support.funcDecomp = !reNative.test(global.WinRTError) && reThis.test(function() { return this; });
-
-/**
- * Detect if `Function#name` is supported (all but IE).
- *
- * @memberOf _.support
- * @type boolean
- */
-support.funcNames = typeof Function.name == 'string';
-
-module.exports = support;